Bedienungsanleitung PerfectPro WS2BT - WORKSTATION 2 (Seite 7 von 50) (Deutsch, Englisch, Holländisch, Französisch)

742528

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

9 10

Display modes – DAB

In DAB mode, the radio can display a range of information on the display. Press the Info

button to cycle through the various modes.

a. Scrolling text Displays scrolling text message e.g. station information,

artist/track name, phone-in number, etc.

b. Signal strength Displays the signal strength of radio reception. The

  clearunlledrectangleindicatesminimumsignallevel

required for satisfactory reception.

c. Program type Displays the type of station being listened to e.g. Pop,

Classic, News, etc.

d. Multiplex name Displays the name of multiplex to which the current

station belongs.

e. Channel & frequency Displays the channel number and frequency for the

currently tuned DAB station.

f. Bit rate & audio format Displays the digital audio bit rate and audio format.

g. Time & date Displays the current time and date.

Finding new stations – DAB

Fromtimetotime,newstationsmaybecomeavailable.Youmayproceedtondnew

stations as follows:

1. In DAB mode, press the Menu button, “Full scan” shows on the display.

2. Press the Tuning knob, the radio will perform a scan of the Band III DAB

channels. As new stations are found, the station counter on the right-hand side of

the display will increase and new radio stations found will be added to the list stored

in the radio.

Manual Tuning – DAB

Manualtuningisanalternativemethodofndingnewstations.Insteadofscanningthe

entire Band III channels automatically, you may tune the radio directly to a known DAB

channel and store all the multiplex in that channel into the available station list.

1. In DAB mode, press the Menu button and rotate the Tuning knob until the LCD

display shows “Manual Tune”, then press the Tuning knob. The display will show

DAB channel and Frequency.

2. Rotate the Tuning knob to select the desired channel or Frequency and press the

Tuning knob to tune to the chosen frequency.

3. When DAB stations in the tuned channel are found, the display will show the

name of the station. Any new radio stations found will be added to the list stored in

the radio.

4. Thesignalstrengthdisplayshowsthereceptionofthestation.Theclearunlled

rectangle indicates minimum signal level required for satisfactory reception. The

signal strength bars will go up or down showing the changing signal strength as you

adjust the antenna or the position of the radio.

5. Repeat step 1 to 4 for other channels with new stations.

6. Press the Menu button twice to exit manual tuning and return to normal

DAB operation.

Dynamic Range Control (DRC) settings – DAB

DRC can make quieter sounds easier to hear when your radio is used in a noisy

environment.

1. In DAB mode, press the Menu button and rotate the Tuning knob until “DRC

value” appears on the display, press the Tuning knob.

2. Rotate the Tuning knob to select required DRC setting (default is OFF).

DRC off DRC is switched off, broadcast DRC will be ignored.

DRC high DRC is set as sent by broadcaster.

DRC low DRC level is set to 1/2 that sent by broadcaster.

3. Press the Tuning the knobtoconrmthesetting.Thedisplaywillreturntonormal

radio display.

Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does

not support DRC, then the DRC setting in the radio will have no effect.

Prune stations – DAB

If you move to a different part of the country, some of the stations which were listed

may no longer be available. Also, from time to time, some DAB services may stop

broadcasting, or may change location or frequency. The Prune stations function will

delete the unavailable DAB stations from your station list.

1. In DAB mode, press the Menu button, the display shows “Full scan”.

2. Rotate the Tuning knob until the display shows “Prune”.

3. Press the Tuning knob to enter the setting.

4. Rotate the Tuning knob to select between “Yes” or “No” (default is No).

Select “Yes” to enable this function if required, otherwise, select “No”.

5. Press the Tuning knobtoconrmyoursetting.Thedisplaywillreturntonormal

radio display.

Note: If you have move the radio to a different part of the country, you should also carry

out a search for new stations (please see the section “Finding new stations – DAB”).

FM MODE

Operating the radio – FM seek station

1. Press the On/Off button to turn on the radio.

2. Select the FM waveband by pressing the Source button.

3. IfthisisthersttimetoswitchtoFMmode,thestationinpreset1willbeplayed.If

the radio has been used before, the last listened station will be played.

4. To seek station, press the Tuning knob.Thescanstopsautomaticallywhenitnds

 astationofsufcientstrength.

5. After a few seconds, the display will update and show station name if RDS

information is being received.

6. Tondthenextstation,presstheTuning knob again.

7. To seek stations in an opposite direction, rotate the Tuning knob clockwise (to scan

from low frequency to high frequency) or rotate counter clockwise (to scan from

high frequency to low frequency), and press the Tuning knob.

PerfectPro WS2BT - WORKSTATION 2 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info