Bedienungsanleitung PerfectPro WS2BT - WORKSTATION 2 (Seite 9 von 50) (Deutsch, Englisch, Holländisch, Französisch)

742528

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

RDS time synchronisation

If “SYNCLOCK ON” is selected, the symbol “ ” will show on the clock display. Some

RDS stations transmit a time signal. If reception is good and you have selected the

“SYNCLOCK ON” option during the time setting, the time will be automatically updated

(“ ”ashesonthedisplay).Timesynchronizationcantakeseveralminutes.The

automatic time setting is always activated when the radio is switched from standby to

FM broadcasting and receives a RDS station.

BLUETOOTH MODE

Pairing Bluetooth with your mobile phone

1. Press the On/Off button to turn on the radio.

2. Select Bluetooth mode by pressing the Source button.

3. The LCD display will show “Not connected” when radio is not yet paired with your

mobile phone.

4. In your mobile phone open the Setting menu and select Bluetooth, then select “PP

WorkStation 2” in the Bluetooth devices list of your mobile phone (Bluetooth

pairing instructions may vary per type of mobile phone, please check your mobile

phone manual).

5. When Bluetooth pairing is successful, the LCD display will show “BT Connected” in

the 1st line, and your mobile’s name in the 2nd line for about 2 seconds.

6. Finally the LCD display will show the connected mobile phone’s name in the 1st line

to indicate the connected device to the radio.

Playing music from your mobile phone

1. Press the On/Off button to turn on the radio.

2. Select Bluetooth mode by pressing the Source button.

3. Start playing music by using the media players in the paired mobile phone.

4. Playback can be controlled from the mobile phone or by pressing the , and

buttons (preset buttons 3, 4 and 5) on the radio.

5. After music playback starts, the name of the song will be displayed in the LCD.

Display modes – Bluetooth

In Bluetooth mode, the radio can display a range of information of the current playing

music on the display. Press the Info button to cycle through the various types.

a. Title Displays scrolling song’s name of the current playback music.

b. Artist Displays the artist’s name of the current playback music.

c. Album Displays the album name of current playback music.

d. Status Displays the playback status. E.g. playing, stopped.

e. Music info Displays the music format and sampling rate of current playing

song. E.g. “AAC” is the format of the song; “44100Hz” is the

sampling frequency of the song.

f. Time & date Displays the current time and date.

Device List – Connect to the paired device

In the radio, you can select the Bluetooth device from the Device list to connect again.

ThedevicenameswouldbeshownifthenameoftheBluetoothdeviceswerecongured

in the mobile devices. Please refer to the user manual of your mobile device for the

congurations.

The Device list can be checked as below:

1. In Bluetooth mode, press the Menu button to enter the system setting.

2. Rotate the Tuning knob until “Device list” is displayed; press the TUNING knob to

select the setting.

3. Rotate the Tuning knob to view the name of the devices.

4. Press the Tuning knob to start Bluetooth reconnection. The speaker will

automatically connect to this selected mobile device.

Note: There can be up to 8 device names stored in the Device list memory. If you store

more than 8 mobile devices into the Device list memory, the earliest paired device name

will be erased.

Note: If you have ever deleted the “PP WorkStation 2” from your connected mobile

phone device, the auto reconnection will be unsuccessful.

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:

1. In Bluetooth mode, press the Menu button to enter the system setting.

2. Rotate the Tuning knob to select the “Disconnect BT” option, and press the

Tuning knob to select the setting.

3. The LCD display will show “Please wait” for a few seconds in order to disconnect

the current connection with the mobile phone device.

4. The LCD display will show “Not connected” and the radio’s Bluetooth is free for any

mobile phone device connection as it is in discoverable mode now.

Note: “Disconnect BT” is the option that forces the Bluetooth of this radio to disconnect

from your mobile phone and enter the “discoverable mode”. This is the way to allow

the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will

automatically try to connect to the last device when it is switched off and on again.

The Auto-Power management function will be activated in Bluetooth mode. If there is no

signal* for a period of over 15 minutes, the radio will automatically

switch to standby mode. Pressing the On/Off button will wake up the unit.

* Also when the incoming signal from the external device is too low and cannot be

detected for a period of over 15 minutes by the Auto-Power management, the radio will

switch to standby mode.

To prevent this raise the output level on the external device enough to be detected.

13 14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

PerfectPro WS2BT - WORKSTATION 2 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info