Bedienungsanleitung Petsafe PPA19-16811 (Seite 3 von 49) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

770959

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

DEITNL

Accessories available online

Thank you for choosing the PetSafe

Brand. You and your pet deserve a

companionship that includes memorable moments and a shared understanding

together. Our products and training tools enhance the relationship between

pets and their owners. If you have any questions about our products

or training your pet, please visit our website at www.petsafe.com

or contact our Customer Care Centre. For a listing of Customer Care

Centre telephone numbers, visit our website at www.petsafe.com.

Programming Cats into the PetSafe®

Microchip Cat Flap

Your PetSafe® Microchip Cat Flap is designed to work with most 15-digit

microchips (FDX-B) used for pets. Before you begin setup or installation of the

cat ﬂap, please ensure your cat has the correct type of microchip.

To begin operation, the cat ﬂap must learn the unique microchip Identiﬁcation

Number (ID) of your cat. Please follow the steps below to begin the setup of

your cat ﬂap:

1. The cat ﬂap will be factory pre-set in the locked position. Ensure the

manual lock is set to the In and Out position (See Fig. H on page 7).

2. Remove the battery cover, set aside the provided hardware pack, and

install 4 high quality alkaline AA batteries (LR6). The green LED light will

ﬂash three (3) times which indicates that the cat ﬂap is in Automatic Mode.

3. To enter Learn Mode, press and hold the button in the battery

compartment until the red LED light appears (about 5 seconds). You will

have 60 seconds to position the cat’s head in the tunnel to learn the

microchip ID. Once the cat ﬂap has learned the microchip ID, it will unlatch

and the red LED will turn off. The cat ﬂap will stay in Automatic Mode and

will re-latch after 3 seconds.

4. After successfully learning the cat’s microchip ID, you will be ready to

install the cat ﬂap into your door.

Note: To learn more than one cat, please follow the same steps starting with

step No. 3. The microchip cat ﬂap can store up to 40 microchipped cats.

Replace the battery cover when the process is complete for all cats.

Helpful Tip: Program your cat’s

microchip ID before installation to

prevent having to hold your cat in the

cat ﬂap once it is installed. If you are

having trouble programming your cat’s

microchip ID, please ensure that their

head is extended into the tunnel with the

microchip cat ﬂap oriented as shown.

You should hear the cat ﬂap unlatch once

it has learned your cat’s microchip ID.

Note: If your cat’s head touches the clear ﬂap prior to

unlatching, then the microchip is not located for best use of

this product. Please contact PetSafe® Customer Service for

additional options for operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Petsafe PPA19-16811 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info