Bedienungsanleitung Philips 32HFL5014 (Seite 33 von 138) (Deutsch)

706058

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

Level.

Select the age and press OK. To switch off the age

rating, select None. However, in some countries you

must set an age rating.

Set Code and Change Code

Press  Home>  Settings > Content rating.

The child lock code is used to lock or unlock channels

or programmes.

Set new code or reset change code.

Press  Home >  Settings > Content rating >

Change Code.

Note:

If you forgot your PIN code, you can override the

current code use 8888 and enter a new code.

11.4

Connect your Android TV

Network and Internet

Home Network

To enjoy the full capabilities of your Philips Android

TV, your TV must be connected to the Internet.

Connect the TV to a home network with a high-speed

Internet connection. You can connect your TV

wirelessly or wired to your network router.

Connect to Network

Wireless Connection

What You Need

To connect the TV to the Internet wirelessly, you need

a Wi-Fi router with a connection to the Internet.

Use a high-speed (broadband) connection to the

Internet.

Make the Connection

Make the Connection - WIRELESS

Press  Home >  Settings >  Wireless and

Networks > Connect to Network > WIRELESS.

1 - In the list of found networks, select on your

wireless network. If your network is not in the list

because the network name is hidden (you switched

off the SSID broadcast of the router), select Add New

Network to enter the network name yourself.

2 - Depending on the type of router, enter your

encryption key - WEP, WPA or WPA2. If you entered

the encryption key for this network before, you can

select OK to make the connection immediately.

3 - A message will be shown when the connection is

successful.

Make the Connection - WPS

Press  Home > 

Settings >  Wireless and

Networks > Connect to Network > WPS.

If your router has WPS, you can directly connect to

the router without scanning for networks. If you have

devices in your wireless network that use the WEP

security encryption system, you cannot use WPS.

1 - Go to the router, press the WPS button and return

to the TV within 2 minutes.

2 - Select Connect to make the connection.

3 - A message will be shown when the connection is

successful.

Make the Connection - WPS WITH PIN Code

Press  Home > 

Settings >  Wireless and

Networks > Connect to Network > WPS WITH PIN

Code.

If your router has WPS with a PIN code, you can

directly connect to the router without scanning for

networks. If you have devices in your wireless

network that use the WEP security encryption system,

you cannot use WPS.

1 - Write down the 8-digit PIN code shown on screen

and enter it in the router software on your PC. Consult

the router manual on where to enter the PIN code in

the router software.

2 - Select Connect to make the connection.

3 - A message will be shown when the connection is

successful.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32HFL5014 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32HFL5014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info