Bedienungsanleitung Philips 32PFL3107 (Seite 27 von 61) (Englisch)

501663

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

EN 27

English

5. Follow the onscreen instructions to select

other options, if any.

The start menu for channel search is

displayed.

6. Start channel search:

 If your channel service provider

instructs you to change settings, select

[Settings], then press OK. Follow the

service provider's instructions to

complete the installation.

 Otherwise, select [Start], then press

OK.

7. Once the channel search is complete,

select [Finish], then press OK.

Tip: Press LIST to see the channel list.

Note: When digital TV channels are found,

the list of installed channels may display

empty channel numbers. You can rename,

reorder or uninstall these channels.

Install analogue channels

You can search and store analogue TV

channels one by one.

Step 1: Select your system

Note: Skip this step if your system settings

are correct.

1. While you watch TV, press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual antenna

installation] > [System], then press OK.

4. Select the system for your country or

region, then press OK.

Step 2: Search and store new TV channels

1. In the [Analogue: Manual antenna

installation] menu, select [Find channel],

then press OK.

2. Find the channel:

 If you know the channel frequency,

enter it with the Navigation buttons or

Numeric buttons.

 If you do not know the channel

frequency, search for the next

frequency that has a strong signal.

Select [Search], and then press OK.

3. After you have found the correct channel,

select [Done], then press OK.

4. Select [Store as new channel], then press

OK to store the new TV channel.

Note: If the reception is poor, reposition

your antenna and repeat the procedure.

Install digital channels

If you know the channel frequency of the

channels you want to install, you can search

and store digital channels one-by-one. For

best results, contact the service provider.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Digital: Reception test] > [Find

channel], then press OK.

4. Press the Numeric buttons to enter the

channel frequency.

5. Select [Search], then press OK.

6. When the channel is found, select [Store],

then press OK.

7. Press to exit.

Note: If your cable provider does not

provide you with a specific symbol rate value

for DVB-C channels, select [Automatic] in

[Symbol rate mode].

Fine-tune analogue channels

If the reception of an analogue TV channel is

poor, you can fine-tune the TV channel.

1. Press .

2. Select [Setup] > [Channel settings] >

[Channel installation].

3. Select [Analogue: Manual antenna

installation] > [Fine tune], and then press

OK.

4. Press or to fine-tune the channel.

5. When you have selected the correct

channel frequency, select [Done], and then

press OK.

6. Select an option, then press OK.

 [Store current channel]: Store the

channel as the current channel number.

 [Store as new channel]: Store the

channel as a new channel number.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 32PFL3107 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 32PFL3107

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info