Bedienungsanleitung Philips 40PFS6909 (Seite 44 von 98) (Englisch)

561051

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

Sources

11.1

Sources list

In the list of connections - the Source menu - you can find the

devices connected to the TV. From this Source menu, you can

switch to a device.

Sources menu

To open the Sources menu, press



SOURCES

To switch to a connected device, select the device with the

arrows



(left) or



(right) and press

For some devices (HDMI-CEC devices), you can select an

activity directly in the list underneath the device icon.

Select the device and select an activity and press

To close the Source menu without switching to a device,

press



SOURCES

again.

Automatic detection

When you connect a new device to the TV, the device is

detected automatically and put in the Sources menu. The device

is shown as an icon (the device type) and has a name. If the

device type does not correspond with the device, e.g. the TV

says it is a player but it is not, you can change the type.

To change the type of the device, press



Change type

and

select a type that fits the device and press

If the name does not fit the device or you want to give the

device a name of your own, press



Rename

. Use the remote

control keypad to enter a new name.

An appropriate device type helps you in using the device. The

device type determines picture and sound styles, resolution

values, specific settings or the position within the Sources menu.

When you connect a new device to the TV, the icon of the

device jumps to the front of the Sources menu.

If the TV does not detect the device automatically, select the

connection you used to connected the device and adjust the

Device type and name.

Original name and icon

To restore the device icon to its original name and type icon,

press



OPTIONS.

Select

Original name and icon

and

press

Scan connections

To rescan all TV connections and update the Sources menu,

press



OPTIONS.

select

Scan connections

and press

11.2

From standby

With the TV in standby, you can switch on a connected device

with your TV remote control.

Play

To switch on both disc player and TV from standby and start

playing the disc or programme immediately, press



(play) on

the TV remote control.

The device should be connected with an HDMI cable and both

TV and device must have HDMI CEC switched on.

Home Theatre System

You can switch on your Home Theatre System to listen to an

audio disc or a radio channel and leave the TV in standby.

To only switch on the HTS, with the TV in standby,

press



SOURCES

on the TV remote control.

11.3

EasyLink

With

EasyLink

you can operate a connected device with the TV

remote control. EasyLink uses HDMI CEC to communicate with

the connected devices. Devices must support HDMI CEC and

must be connected with an HDMI connection.

For more information, press



Keywords

and look

EasyLink

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFS6909 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFS6909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info