Bedienungsanleitung Philips 40PFS6909 (Seite 46 von 98) (Englisch)

561051

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

13.1

What you need

For Active 3D sets

This is an Active 3D TV. On this TV, you can watch 3D

programmes and movies in full High Definition resolution with

Active 3D.

To watch 3D you need to :

• Tune to a TV channel that broadcasts programmes in 3D.

• Rent a movie in 3D from an online video store with Smart TV.

• Watch a movie in 3D from a 3D Blu-ray Disc, a USB device or

computer.

Also, to watch 3D on this TV, you will need one of these types

of Philips Active 3D glasses. . .

• PTA507

• PTA508

• PTA509

• PTA517

• PTA518

• PTA519

13.2

The 3D glasses

For Active 3D sets

Overview

1 - On or off switch

2 - Player 1 or player 2 selection

3 - Receiver lens

4 - Battery compartment

When you unpack the 3D glasses, also remove the small plastic

foil from the battery compartment that prevents the battery

from running empty.

Switch on and off

Switch on

When a 3D programme is shown on screen, press



on the 3D

glasses and put them on. The glasses need some seconds to

adjust to the 3D signal from the 3D transmitter on the TV. At

first use, this may take up to 15 seconds.

Battery level

You can check the battery level when you switch on the 3D

glasses.

• If the LED light blinks green, you can use the glasses for 4

hours or more.

• If the LED light blinks orange, you can use the glasses for at

least 2 hours but less than 4.

• If the LED light blinks red, the battery is almost empty and less

than 2 hours of 3D watching remain.

Switch off

To switch off the 3D glasses, press



. The LED light blinks red 4

times. When the 3D glasses do not receive 3D signals for 2

minutes, the glasses switch off automatically.

3D transmitter

Make sure the receiver lens in the centre of the glasses can

receive the 3D signals. Also, clear objects away from the 3D

transmitter on the TV.

1 - 3D transmitter on the TV

2 - 3D receiver on the 3D glasses

Two-player gaming

You can use these glasses to play two-player games. Two players

can watch the same TV but see two different screens to play a

game.

To switch the glasses to watch the Player 1 or Player 2 screen,

switch on the glasses and then press the

Player 1/2

key.

• If the LED light is orange and lits continuously for 2 seconds,

the glasses are set for player 1.

• If the LED light is orange and blinks, the glasses are set for

player 2.

For more information, press



Keywords

and look up

Two-

player gaming

Replacing the batteries

To replace the battery of the 3D glasses PTA508, unscrew the

small battery lid and replace the battery: type CR2032 (3V).

Make sure the + side of the battery is visible. Replace the lid and

fix it with the screw.

To replace the battery of the 3D glasses PTA509, PTA519,

press the small knob on the battery lid and slide the lid up to

open. Replace the battery: type CR2032 (3V). Make sure the +

side of the battery is visible. Replace the lid and slide it down

until it clicks.



Warning

• Do not ingest battery, chemical burn hazard.

• This product contains a coin/button cell battery. If the

coin/button cell battery is swallowed, it can cause severe internal

burns in just two hours and can lead to death.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 40PFS6909 Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 40PFS6909

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info