Bedienungsanleitung Philips 42PFL5008H (Seite 57 von 74) (Englisch)

523837

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN 57

English

Switch on EasyLink

1. Press .

2. Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3. Select [EasyLink] > [On], then press OK.

Control devices

If you connect multiple HDMI-CEC devices

that support this setting, you can control all

such devices through the TV remote control.

Note: This is an advanced setting. Devices

that do not support this setting cannot

respond to the TV remote control.

1. Press .

2. Select [Setup] > [TV settings] > [General

settings] > [EasyLink] > [EasyLink remote

control].

3. Select [On] or [Off], then press OK.

Tips:

 To switch back to TV control, press ,

then select [Watch TV].

 To control another device, press ,

then select the device from the Home

menu.

EasyLink buttons

You can control HDMI-CEC compliant

devices with the following buttons on the TV

remote control:

 : Switch the TV and the connected

device on or to standby.

 Play buttons: Control video or music

play.

 Numeric buttons: Select a title, chapter

or track.

 OK: Start, pause or resume play on the

connected device, activate a selection,

or access the device menu.

 : Display the TV Home menu.

Switch off connecting devices

You can also set the TV to switch off the

connecting HDMI-CEC compliant devices if

they are not the active source. The TV

switches the connecting device to standby

after 10 minutes of inactivity.

1. Press .

2. Select [Setup] > [TV settings] > [General

settings] > [EasyLink].

3. Select [Auto switch off devices] > [On],

then press OK.

Select speaker output

If a connected device is HDMI Audio Return

Channel (HDMI ARC) compliant, you can

output TV audio through an HDMI cable.

Additional audio cables are not required.

Make sure you connect the device to the

HDMI ARC connector on the TV. See

Connect your TV > About cables > HDMI

(Page 45).

Switch on HDMI ARC

1. Press .

2. Select [Setup] > [TV settings] > [Sound]

> [Advanced] > [HDMI 1 - ARC].

3. Select one of the following, then press

OK.

 [On]: Hear the TV audio through the

connected HDMI-ARC compliant

device.

 [Off]: Hear the TV audio through the

TV speakers, or through a device

connected through the digital audio out

connector.

Note: Make sure that all HDMI-CEC settings

are properly set up on the connected device.

Set up TV speakers

1. Press .

2. Select [Setup] > [TV settings] > [Sound]

> [Advanced] > [TV speakers].

3. Select an option, then press OK:

 [Off]: Switch off TV speakers.

 [On]: Switch on TV speakers.

 [EasyLink]: Switch off TV speakers and

stream TV audio to a connected

HDMI-CEC audio device.

 [EasyLink autostart]: When a HDMI-

CEC audio device is connected,

automatically switch off TV speakers

and stream TV audio to the device.

Change TV audio streaming

You can switch audio between TV speakers

and a connected amplifier at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PFL5008H Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PFL5008H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info