Bedienungsanleitung Philips 42PFL5008H (Seite 59 von 74) (Englisch)

523837

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

EN 59

English

You can connect this TV to your home

network through a wired or wireless

connection.

 For a wired connection, see Connect

your TV > Connect to a network and

the Internet > Wired connection

(Page 59).

 For a wireless connection, see Connect

your TV > Connect to a network and

the Internet > Wi-Fi integrated (Page

59).

Wired connection

1. Switch on the router and switch on its

DHCP setting.

2. Connect the router to the TV with an

Ethernet cable.

3. Press , then select [Setup].

4. Select [Connect to network], then press

OK.

5. Follow the onscreen instructions to install

the network.

6. Wait for the TV to find the network

connection.

7. If you are prompted, agree to the End

User Licence Agreement.

WiFi integrated

This section is only applicable for WiFi-

integrated TVs.

You can connect your TV to your home

network wirelessly.

Note:

 The wireless network operates in the

same 2.4 GHz frequency spectrum as

common household devices, such as

Dect phones, microwave ovens or

Bluetooth devices, which can cause

WiFi interference. Move these devices

away from the TV.

 For optimum WiFi performance, place

the TV at a distance of less than 10 m

from the wireless router. Avoid

obstructions such as concrete walls

between the router and the TV.

 Reception quality depends on the

location of the wireless router and your

local Internet service provider.

 To reduce network traffic, switch off

unused network equipment in the

home network.

 When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

Start wireless setup

1. Switch on your wireless network router.

2. Press on the TV remote control.

3. Select [Setup] > [Connect to network],

then press OK.

4. Follow the onscreen instructions.

WPS - Wi-Fi Protected Setup

1. If your router supports Wi-Fi Protected

Setup (WPS), press the WPS button on the

router.

2. After 2 minutes, select [WPS] on the TV,

then press OK.

The TV connects to your network. This

takes about 2 minutes.

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPS security encryption and

cannot be combined with devices on your

network that use the WEP (Wired

Equivalent Privacy) security encryption.

If you still need the WEP devices in your

network, install with [Scan] > [Custom].

Scan for routers

If you have several routers in your network,

you can select the network you need.

1. To select a specific network router, press

[Scan] on the first page of the installation.

The routers with WPS and the strongest

signal are shown first in the list on screen.

2. Select the router you need, then press

OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 42PFL5008H Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 42PFL5008H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info