706203
28
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
EN 28
[OSD display]: Enable or disable
on-screen information.
[High security mode]: Select [On] to
restrict access to the professional setup
menu.
[Welcome Logo]: Enable or disable the
welcome logo that appears when the
TV starts.
[Hotel Info]: Enable or disable the
welcome message.
[Browse USB]: Hide or unhide the
[Browse USB] icon in the home menu.
[Auto scart]: Enable or disable the auto
SCART feature -- this feature allows a
connected SCART device to turn the
TV on or off.
[Easylink Break-in]/[Easylink
control]/[Easylink Application menu]:
Enable or disable access to various
EasyLink features.
[Auto USB]: Enable or disable access
to a connected USB storage device.
[SXP BaudRate]: Select a baud rate
value (38400 or 19200).
[Enable CI slot]: Enable or disable
access to the Common Interface slot.
[Enable Teletext]: Enable or disable
access to Teletext.
[Enable MHEG]: Enable or disable
access to MHEG channels. Applicable
to UK only.
[Enable EPG]: Enable or disable access
to the Electronic Program Guide.
[Subtitle On StartUp]: Enable or
disable subtitles when the TV starts.
[Enable subtitles]: Enable or disable
subtitles
[Enable Channel Map]: Enable or
disable channel mapping.
[Source setup]: Lists all supported
connectors on the TV. A disabled
connector will not be visible from the
Source menu.
[Joint Space]: Enable or disable the
Joint Space feature.
[Freeze on no signal]: Determine the
TV behavior if there is no TV signal.
[Simply Share]: Enable or disable the
Simply Share feature.
[Scrambled Program OSD]: When
disabled, scrambled programs will not
be visible to guests.
More professional setup
settings
Change power settings
Customize the way the TV behaves when it
is switched on.
1. In professional mode, select [Professional
Setup] > [Power settings].
2. Use the Navigation buttons to select a
setting to change, then press OK:
[Power on]: Determine whether the
TV goes to standby when the TV is
switched on.
[Low power standby]: Determine
whether standby mode is regular (fast)
or green (low energy).
[Smart power]: Enable or disable
energy saving mode.
[Auto Power Down]: Set the TV to
automatically switch off if inactive for
four hours or more.
[Delayed reboot]: Enable or disable a
delay in standby.
[Standby Delay Timeout]: Set the
period of standby delay.
Change clock settings
Clock settings are available on certain
models only.
1. In professional mode, select [Professional
Setup] > [Clock settings].
2. Use the Navigation buttons to select a
setting to change, then press OK:
[Display Standby]: Set the clock to go
into standby after a defined period of
time.
[Display On]: Enable or disable the
clock.
[Time Setting]: Manually enter the time.
28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 47HFL5007D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips 47HFL5007D

Philips 47HFL5007D Bedienungsanleitung - Deutsch - 60 seiten

Philips 47HFL5007D Bedienungsanleitung - Holländisch - 58 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info