706203
30
Zoom out
Zoom in
Vorherige Seite
1/54
Nächste Seite
EN 30
Channel installation
Install DVB-T/T2, DVB-C or analog channels
broadcast over cable.
In professional mode, select [Installation],
then press OK. The channel installation list
appears, allowing you to choose the type of
channels to install:
[DVB-T/T2 ]: Install DVB-T/T2
channels by selecting [On].
[DVB-C ]: Install DVB-C channels by
selecting [On].
[Analog]: Install analogue channels by
selecting [On].
Change Smart Clone
settings
Smart Clone allows you to easily clone TV
settings from one Philips TV to another. The
feature also allows you to download
software updates via RF or IP (Internet
Protocol).
Clone TV settings
Easily copy TV settings to a USB storage
device, then clone the settings onto another
Philips TV.
Copy TV settings to USB
1. Connect a formatted USB storage device
to a USB connector on the TV.
2. In professional setup menu, select [Smart
Clone] > [USB to TV], then press OK. All
TV settings are copied to the USB device.
Clone TV settings to another TV
1. Connect the USB device to to the Philips
TV to be cloned.
2. In professional setup menu, select [Smart
Clone] > [TV to USB], then press OK. All
TV settings are cloned to the TV.
Download software via RF
The TV supports downloading of software
via RF (Radio Frequency).
1. In professional setup menu, select [Smart
Clone] > [RF download].
2. Use the Navigation buttons to select a
setting to change, then press OK:
[Enable]: Enable or disable RF
download.
[SW Type]: Specify the type of
software to download.
[Program Info]: Specify RF details such
as frequency, modulation and
connection type (cable or antenna).
[Start Download]: Start RF download.
Once the TV successfully downloads
the software, it automatically installs the
downloaded data onto the TV.
IP software upgrade
The TV supports software upgrades via IP
(Internet Protocol).
1. In professional setup menu, select [Smart
Clone] > [IP Upgrade].
2. Use the Navigation buttons to select a
setting to change, then press OK:
[Enable]: Enable or disable IP upgrade.
[SW Type]: Specify the type of
software to upgrade.
[Start upgrade]: Start the upgrade and
display the status page.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips 47HFL5007D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips 47HFL5007D

Philips 47HFL5007D Bedienungsanleitung - Deutsch - 60 seiten

Philips 47HFL5007D Bedienungsanleitung - Holländisch - 58 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info