Bedienungsanleitung Philips 47PFL7456K (Seite 54 von 68) (Englisch)

450130

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN 54

 A computer network that includes:

a) A universal plug-and-play (UPnP)

router and

b) A computer with one of these

operating systems: Microsoft Windows

XP, Microsoft Windows Vista, Mac

OSX, or Linux.

 To connect your TV to computers, you

also need media server software that is

set to share files with your TV. See Use

your TV > Browse PC through DLNA

(Page 19).

 To connect your TV to the Internet,

you also need a high-speed connection

to the Internet.

Note: This DLNA1.5 network feature

supports these computer operating systems:

Microsoft Windows XP or Vista, Intel Mac

OSX or Linux.

Connect

1. Switch on the router and switch on its

DHCP setting.

2. With the ethernet cable, connect the

router to the TV.

Alternatively, you can also connect the

router to the TV wirelessly, through a

wireless USB adaptor (not included). See

Connect your TV > Computers and the

Internet > Wireless LAN ready (Page 54).

3. Press , select [Setup] > [Connect to

network], then press OK.

4. Follow the onscreen instructions to install

the network.

5. Wait for the TV to find the network

connection.

6. If you are prompted, agree to the End

User License Agreement.

Wireless LAN ready

This section is only for wireless ready TVs.

With the Wireless USB adapter PTA01

accessory (sold separately), you can connect

the TV to your home network wirelessly.

You can enjoy the best of the web from Net

TV services, and sharing of content between

your devices connected to the home

network using Wi-Fi MediaConnect or

DLNA, seamlessly and hassle free.

Note:

 The wireless network operates in the

same 2.4GHz frequency spectrum as

common household devices, such as

Dect phones, microwave ovens or

Bluetooth devices, which can cause Wi-

Fi interferences. Move these devices

away from the TV with the connected

Wireless USB adapter.

 You should turn off any unused

network equipment in the home

network as this increases network

traffic.

 Reception quality is dependent on the

location of the wireless router, as well

as the quality of services provided by

the local Internet Service Provider.

 When playing video over your wireless

home network, we recommend that

you use an IEEE 802.11 N router. The

connection speed may differ according

to the operating environment of your

wireless home network.

Make your TV wireless

1. Switch on your wireless network router.

2. Insert the USB adapter PTA01 into the

USB connection at the side of the TV. The

wireless installation starts automatically.

3. Follow the on screen instructions.

WPS - Wi-Fi Protected Setup

If your router supports WPS (Wi-Fi

Protected Setup), press the WPS button on

the router. Return to the TV in 2 minutes,

select [WPS] and press OK. The TV

connects to your network. This takes about

2 minutes. Complete the installation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 47PFL7456K Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 47PFL7456K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info