Bedienungsanleitung Philips 47PFL7456K (Seite 55 von 68) (Englisch)

450130

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

EN 55

English

Most new wireless routers have the WPS

system and carry the WPS logo. The WPS

system uses WPA security encryption and

cannot be combined with devices on your

network that use the WEP security

encryption. If you still need this WEP device

in your network, install with [Scan] >

[Custom].

Scan for routers

If you have several routers in your network,

you can select the network you need. To

select a specific network router, press

[Scan]on the first page of the installation.

The routers with WPS and the strongest

signal are shown first in the list on screen.

Select the router you need. If you are

connecting a WPS router, select [WPS] on

the TV.

 If you have set the PIN code in your

router software, select [WPS pincode:]

and enter the code.

 To enter the encryption key manually,

select [Custom] and enter the key.

PIN code

To set the secured connection with a PIN

code, select the PIN code and press OK.

Write down the 8 digit PIN code shown on

the TV and enter it in the router software

on your PC. See the router manual for

where to enter the PIN code.

Custom

To enter the encryption key (the security

key) manually, select [Custom] and press

OK. If you have WPA security on your

router, enter the passphrase with the

remote control.

To access the on-screen keyboard, select the

text entry field and press OK. If you have

WEP security encryption, the TV asks for the

WEP encryption key in hexadecimal

numbers.

Find this hexadecimal key in the router

software on your PC. Write down the first

key of the WEP keys list and enter it on the

TV with the remote control. If the security

key is accepted, the TV is connected with

the wireless router.

If asked, agree to the End User License

Agreement.

If you are using the Wireless USB adapter,

keep it connected to the USB connector on

the TV.

Wi-Fi MediaConnect

What you can do

With Wi-Fi MediaConnect, you can project

your PC screen on the TV wirelessly. With

the *Wi-Fi MediaConnect CD-ROM, you

can download the software for free. Wi-Fi

MediaConnect is only available for PC.

*The Wi-Fi MediaConnect CD-ROM is

supplied with the Wireless USB adapter,

PTA01.

What you need

To use Wi-Fi MediaConnect, you need the

following:

 Connect the TV to your home network

 A wireless router

 A wireless USB adapter - PTA01 (For

non-Wi-fi integrated TVs only).

For the availability of the wireless USB

adapter, check with your local retailers or

buy online at www.philips.com/tv.

Install Wi-Fi MediaConnect (with CD-

ROM)

1. Insert the Wi-Fi MediaConnect CD-ROM

in your PC.

2. Your PC starts the Internet browser and

opens the Wi-Fi MediaConnect download

page - www.philips.com/wifimediaconnect.

On the website, you can check the

necessary PC system requirements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 47PFL7456K Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 47PFL7456K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info