Bedienungsanleitung Philips 49PUS6501 (Seite 85 von 107) (Englisch)

628877

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

• Search Channel

To find a channel, select Search Channel and

press OK. You can enter a frequency yourself to find

a channel or let the TV search for a channel.

Press



(right) to select Search and press OK to

search for a channel automatically. The found

channel is shown on screen and if the reception is

poor, press Search again. If you want to store the

channel, select Done and press OK.

• Store

You can store the channel on the current channel

number or as a new channel number.

Select Store Current Channel or Store as New

Channel and press OK. The new channel number is

shown briefly.

You can redo these steps until you have found all

available analogue TV channels.

25.2

Satellite Installation

About Installing Satellites

This TV has two built-in satellite DVB-S/DVB-S2

tuners.

Up to 4 Satellites

You can install up to 4 satellites (4 LNBs) on this TV.

Select the exact number of satellites you wish to

install at the start of the installation. This will speed up

the installation.

Unicable

You can use a Unicable system to connect the

antenna dish to the TV. You can select Unicable for 1

or for 2 satellites at the start of the installation.

MDU - Multi-Dwelling-Unit

The built-in satellite tuners support MDU on the Astra

satellites and for Digiturk on the Eutelsat satellite.

MDU on Türksat is not supported.

Start the Installation

Make sure your satellite dish is connected correctly

and is perfectly aligned before you start the

installation.

To start the satellite installation…

1 - Press



, select All Settings and press OK.

2 - Select Channels > Satellite Installation and

press OK. Enter your PIN code if necessary.

3 - Select Search for Satellite and press OK.

4 - Select Search and press OK. TV will search for

satellites.

5 - Select Install and press OK. The TV shows the

current satellite installation setup.

If you want to change this setup, select Settings.

If you don't want to change the setup, select Search.

Go to step 5.

6 - In Installation System, select the number of

satellites you want to install or select one of the

Unicable systems. When you select Unicable, you

can choose the User Band Numbers and enter the

User Band Frequencies for each tuner. In some

countries, you can adjust some expert settings for

each LNB in More Settings.

7 - The TV will search for the satellites available on

the alignment of your antenna dish. This may take a

few minutes. If a satellite is found, its name and

reception strength are shown on screen.

8 - When the TV found the satellites you need,

select Install.

9 - If a satellite offers Channel Packages, the TV will

show the available packages for that satellite. Select

the package you need. Some packages offer

a Quick or Full install for their available channels,

select one or the other. The TV will install the satellite

channels and radio stations.

10 - To store the satellite setup and installed

channels and radio stations, select Finish.

Satellite Installation Settings

The satellite installation settings are preset according

your country. These settings determine how the TV

searches and installs satellites and its channels. You

can always change these settings.

To change the satellite installation settings…

1 - Start the satellite installation.

2 - On the screen where you can start searching for

satellites, select Settings and press OK.

3 - Select the number of satellites you want to install

or select one of the Unicable systems. When you

select Unicable, you can choose the User Band

Numbers and enter the User Band Frequencies for

each tuner.

4 - When you're done, select Next and press OK.

5 - On the Settings menu, press the colour

key



Done to return to the screen to start

searching for satellites.

Homing Transponder and LNB

In some countries, you can adjust the expert settings

for homing transponder and each LNB. Only use or

change these settings when a normal installation fails.

If you have non-standard satellite equipment, you

can use these settings to overrule the standard

settings. Some providers might give you some

transponder or LNB valeus which you can enter here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 49PUS6501 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 49PUS6501

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info