Bedienungsanleitung Philips 55PFS8109 (Seite 81 von 121) (Englisch)

548395

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

not subscribe to pay TV channels or services, you can select

Free Channels Only

For more information, press the colour key



Keywords

and

look up

CAM - Conditional Access Module

Reception Quality

You can check the quality and signal strength of a digital

channel. If you have your own antenna, you can reposition the

antenna to try and improve the reception.

To check the reception quality of a digital channel…

- Tune to the channel.

- Press



and press



(left)

Setup

- Click

General Settings

Antenna/Cable Installation

and

click Test Reception.

The digital frequency is shown for this channel. If the reception is

poor, you can reposition your antenna. To check the signal

quality of this frequency again, select

and press

To enter a specific digital frequency yourself, use the remote

control digit keys. Alternatively, select the frequency, position the

arrows on a number with



and



and change the number with



and



. To check the frequency, click

If you use DVB-C to receive channels, the options

Symbol Rate

Mode

and

Predefined Symbol Rates

are available. For Symbol

Rate Mode, select

Automatic

, unless your cable operator gave

you a specific symbol rate value. To enter the symbol rate value,

use the number keys.

Manual Installation

Analogue TV channels can be manually installed, channel by

channel.

To install analogue channels manually…

- Press



and press



(left)

Setup

- Click

General Settings

Antenna/Cable Installation

and

click

Manual Installation

•

System

To set up the TV system, click

System

Select your country or the part of the world where you are

now.

•

Search Channel

To find a channel, click

Search Channel

. Click

. You can

also enter a frequency yourself. If the reception is poor, press

again. If you want to store the channel, click

Done

•

Store

You can store the channel on the current channel number or as

a new channel number.

Select

Store Current Channel

Store as New Channel

You can redo these steps until you have found all available

analogue TV channels.

25.10

Installation Satellite

Installing Satellites

About Installing Satellites

This TV has two built-in satellite DVB-S/DVB-S2 tuners.

Up to 4 Satellites

You can install up to 4 satellites (4 LNBs) on this TV. Select the

exact number of satellites you wish to install at the start of the

installation. This will speed up the installation.

Unicable

You can use a Unicable system to connect the antenna dish to

the TV. You can select Unicable for 1 or for 2 satellites at the

start of the installation.

MDU - Multi-Dwelling-Unit

The built-in satellite tuners support MDU on the Astra satellites

and for Digiturk on the Eutelsat satellite. MDU on Türksat is not

supported.

Start the Installation

Make sure your satellite dish is connected correctly and is

perfectly aligned before you start the installation.

To start the satellite installation…

1 - Press



and press



(left) for

Setup

2 - Click

Satellite Installation

and click

Start

3 - Click

Install Satellites

and confirm with

Reinstall

. The TV

shows the current satellite installation setup.

If you want to change this setup, click

Settings

. Go to step

If you don't want to change the setup, click

. Go to step

3b -

The TV has 2 built-in satellite tuners. According to how

many satellite dish cables you have connected –1 or 2,

select

One Tuner

Two Tuners

. If you use a Single Cable

system (Unicable or MDU), always select

Two Tuners

4 - In

Installation System

, select the number of satellites you

want to install or select one of the Unicable systems. When you

select Unicable, you can choose the User Band Numbers and

enter the User Band Frequencies for each tuner. In some

countries, you can adjust some expert settings for each LNB

More Settings

5 - The TV will search for the satellites available on the

alignment of your antenna dish. This may take a few minutes. If a

satellite is found, its name and reception strength are shown on

screen.

6 - When the TV found the satellites you need, click

Install

7 - If a satellite offers

Channel Packages

, the TV will show the

available packages for that satellite. Click on the package you

need. Some packages offer a

Quick

Full

install for their

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFS8109 Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFS8109

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info