Bedienungsanleitung Philips 55PFS8109 (Seite 82 von 121) (Englisch)

548395

Zoom out

Zoom in

Vorherige Seite

1/121

Nächste Seite

available channels, select one or the other. The TV will install the

satellite channels and radio stations.

8 - To store the satellite setup and installed channels and radio

stations, click

Finish

Satellite CAMs

If you use a CAM – a Conditional Access Module with a smart

card – to watch satellite channels, we recommend to do the

satellite installation with the CAM inserted in the TV.

Most CAMs are used to descramble channels.

Newest generation CAMs (CI+ 1.3 with Operator Profile), can

install all the satellite channels by themselves on your TV. The

CAM will invite you to install its satellite(s) and channels. These

CAMs not only install and descramble the channels but also

handle regular channel updates.

Channel Packages

Satellites can offer channel packages that bundle free channels

(free-to-air) and offer a sorting that suits a country. Some

satellites offer subscription packages - a collection of channels

you pay for.

If you choose a subscription package, the TV might ask you to

select a Quick or Full installation.

Select

Quick

to install the channels of the package only or

select

Full

to install the package and all other available channels

too. We recommend a Quick installation for subscription

packages. If you have additional satellites that are not part of

your subscription package, we recommend a Full installation. All

installed channels are put in the channels list All.

Unicable Setup

The Unicable System

You can use a Single Cable system, MDU or Unicable system to

connect the antenna dish to the TV. A Single Cable system uses

one cable to connect the satellite dish to all satellite tuners in its

system. A Single Cable system is typically used in apartment

buildings. If you use a Unicable system, the TV will ask you to

assign a user band number and corresponding frequency during

the installation. You can install 1 or 2 satellites with Unicable on

this TV.

If you notice some missing channels after a Unicable installation,

another installation might have been done at the same moment

on the Unicable system. Do the installation again to install the

missing channels.

User Band Number

In a Unicable system, each connected satellite tuner must be

numbered (e.g. 0, 1, 2 or 3 etc.).

You can find the available user bands and their number on the

Unicable switchbox. User band is sometimes shortened as UB.

There are Unicable switchboxes that offer 4 or 8 user bands. If

you select Unicable in the settings, the TV will ask you to assign

the unique user band number for each built-in satellite tuners. A

satellite tuner cannot have the same user band number as

another satellite tuner in the Unicable system.

User Band Frequency

Next to the unique user band number, the built-in satellite

receiver needs the frequency of the selected user band number.

These frequencies are mostly shown next to the user band

number on a Unicable switchbox.

Automatic Channel Update

If you receive digital satellite channels, you can set the TV to

automatically update these channels.

Once a day, at 6 AM, the TV updates the channels and stores

new channels. New channels are stored in the Channels List and

are marked with a



. Channels without a signal are removed

and if a satellite operator reorders its channel package, the

channel list of the TV will be updated. The TV must be in

Standby to automatically update channels. You can switch off

Automatic Channel Update.

To switch off the automatic update…

1 - Press



and press



(left)

Setup

2 - Click

Satellite Installation

Automatic Channel Update

and

click

Off

3 - Press



BACK

repeatedly if necessary, to close the menu.

You can set the TV to only update the channels of a specific

satellite.

To mark satellites for updating…

1 - Press



and press



(left)

Setup

2 - Click

Satellite Installation

and click

Automatic Update

Option

. In the list of satellites, click a satellite to mark or unmark.

3 - Press



BACK

repeatedly if necessary, to close the menu.

In certain countries, the automatic channel update is done while

watching TV or on any moment when the TV is in Standby.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips 55PFS8109 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips 55PFS8109

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info