Bedienungsanleitung Philips BDP9700 (Seite 23 von 31) (Englisch)

518949

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

24 EN

6 Troubleshooting

Warning

• Risk of electric shock. Never remove the casing of the

player.

To keep the warranty valid, never try to repair

the player yourself.

If you have problems using this player, check the

following points before you request service. If

you still have a problem, register your player and

get support at www.philips.com/support.

If you contact Philips, you will be asked for the

model and serial number of this player. The

model number and serial number are on the

back of this player. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Main unit

The buttons on this player do not work.

• Disconnect this player from the power

supply for a few minutes, and then

reconnect.

Picture

No picture.

• Make sure that the TV is switched to the

correct source input for this player.

• For the composite connection (via the

VIDEO connector) to the TV, on this player

select a video resolution of 480i/576i or

480p/576p to enable video output (press

, and select [Setup] > [Video] > [HDMI

video]) .

No picture on HDMI connection.

• Make sure that the HDMI cable is not

faulty. If it is faulty, replace with a new

HDMI cable.

• On the remote control, press and then

press “731” (numeric buttons) to recover

picture display. Or wait for 10 seconds for

auto recovery.

• If this player is connected to an

unauthorized display device with an HDMI

cable, the audio and video signals may not

be output.

Thediscdoesnotplayhigh-denitionvideo.

• Make sure that the disc contains high-

denition video.

• Make sure that the TV supports high-

denition video.

Sound

No audio output from the TV.

• Make sure that the audio cables are

connected to the audio input of the TV.

• Make sure that the TV is switched to the

correct source input for this player.

No audio output from the loudspeakers of

the external audio device (home theater or

amplier).

• Make sure that the audio cables are

connected to the audio input of the audio

device.

• Switch the external audio device to the

correct audio source input.

No 7.1 channel audio from the loudspeaker of

the audio system.

• Make sure that the disc contains 7.1

channel audio.

• Make sure that the audio device supports

7.1 channel audio.

• Make sure that the audio format is

supported by the disc and the connected

audio device (amplier/receiver).

• For play of video les with DTS multi-

channel audio from USB or DLNA, only 2

channel audio can be heard from multi-

channel connection.

No sound on HDMI connection.

• You may not hear any sound from the

HDMI output if the connected device

is non-HDCP compliant or only DVI-

compatible.

BDP9700_98_UM_V1.0.indb 24 2012/9/27 16:48:30

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips BDP9700 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips BDP9700

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info