Bedienungsanleitung Philips CRYSTAL650 (Seite 34 von 80) (Englisch)

26364

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

34 7. Fax Switch

Machine Functions

Manual Fax Reception

If you select the option manual in the setting Fax

rings (see also Setting SM Modes), faxes are not

received automatically. You must start the fax reception

manually: press the Y button on your multifunction

machine (or *5 on your external telephone). is is

useful if you would like to receive your faxes on the PC

via an external modem.

Using External

Telephones (Easylink)

e Easylink function oﬀers you additional options for

managing external devices that are connected to the

same telephone line as your multifunction machine. To

this end, additional telephones must be set to the tone

dialling mode (DTMF tones). Please consult the user

manual for your external device on how to set the de-

vice to tone dialling mode.

Only change these codes if it is absolutely

necessary. Please note that the codes must be

diﬀerent. Otherwise the following message will

appear on the display: CODE NOT OK.

Starting Fax Reception

If you pick up on an additional telephone and notice

that the call is a fax transmission (whistling tone or si-

lence), you can start the fax reception either by pressing

the Y button on the multifunction machine or *5

on the external telephone.

If you would like to change the predeﬁned

code, press MENU/OK and 641. Enter

the new code and conﬁrm with OK. e code

should start with * or #!

Taking Over the Line

If you pick up on an external telephone and the

multifunction machine continues to ring or attempts

to receive faxes, you can disconnect the multifunction

machine from the line and accept the call by pressing

** on the external telephone.

If you would like to change the predeﬁned

code, press MENU/OK and 643. Enter

the new code and conﬁrm with OK. e code

should start with * or #!

Using an External

Answering Machine

Connect the external answering machine as described in

chapter Installation / Connecting Additional Devices.

For the best possible operation, the external answering

machine must be set to one or two rings. Set total

rings and Fax rings to at least two more rings

than your external answering machine to prevent calls

from being automatically accepted by the fax switch.

If you switch oﬀ the answering machine, calls will be

accepted by the fax switch.

Setting example:

Number of rings on answering machine 2

FAX RINGS 3

TOTAL RINGS 5

e outgoing message of your external an-

swering machine should be shorter than ten

seconds. Avoid music in the outgoing message.

If your external answering machine has a “con-

serving function” (i.e. a function that changes the

number of rings as soon as new messages have

been recorded), it is best to deactivate this func-

tion.

It can occur that the answering machine counts

fax calls in addition to the received messages. If

your external answering machine records fax sig-

nals, but your multifunction machine cannot re-

ceive faxes, you should inspect the connection of

your external answering machine (see chapter In-

stallation / Connecting Additional Devices).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips CRYSTAL650 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips CRYSTAL650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info