Bedienungsanleitung Philips DVP-620VR (Seite 6 von 20) (Englisch)

584558

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Connecting to Optional Equipment

(for DVD features)

• A digital component with a built-in MPEG 2 or Dolby Digital

decoder allows you to enjoy the surround sound while

producing the effect of being in a movie theater or a concert

hall.

• The player outputs the surround sound signals from the

DIGITAL OUT COAXIAL or OPTICAL connector.

If your receiver has a MPEG 2 or Dolby Digital decoder,

Connect the COAXIAL or OPTICAL DIGITAL AUDIO OUT

of the DVD/VCR to the COAXIAL or OPTICAL DIGITAL

AUDIO IN on your receiver.

Notes:

– If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will

produce a strong, distorted sound or no sound at all.

– MP3 Audio is not available on the Digital Output.

– You will still need the video cable or RF coaxial cable for

VCR features.

Connecting to an Audio System

(for DVD features)

1 You can also listen to the sound of audio CDs and DVD video

discs by connecting to an optional stereo system.

2 Connect DVD/VCR ANALOG AUDIO OUT (Left and Right)

to the audio in on the stereo system.

Simplest connection using only supplied

black RF coaxial cable

1 Disconnect the antenna or cable from your TV.

Connect the antenna or cable to the AERIAL of your DVD/VCR.

3 Connect black RF coaxial cable to the RF OUT on the rear

panel of the DVD/VCR and to the ANTENNA IN on the TV.

4 Plug in the power cords of the TV and DVD/VCR.

Connecting to a TV

Connect the antenna or cable to the AERIAL of your DVD/

VCR.

2 Connect the DVD/VCR (AV1 TV) on the DVD/VCR to the

corresponding connector on the TV.

Note:

– Ensure that the “TV” indication on SCART cable is

connected to the TV set and “DVD” indication on SCART

cable is connected to the DVD/VCR.

If your TV is not equipped with a SCART input, you can select

the following connection:

If your TV has a S-Video input connector,

Connect the antenna or cable to the AERIAL of your DVD/VCR.

2 Connect the S-Video out on the DVD/VCR to the S-Video in

on the TV.

3 Connect the ANALOG AUDIO OUT on the DVD/VCR to the

Left and Right audio in on the TV.

Note:

– You will still need the SCART cable or RF coaxial cable

for VCR features.

Basic Connections

• Please refer to the instruction books of your TV,VCR, Stereo

System or other devices as necessary to make the best

connections.

• Make one of the following connections, depending on the

capabilities of your existing equipment.

The following guidelines are options for the best picture and

sound quality available on your DVD/VCR.

Picture

1 Use SCART RGB Output (DVD/VCR(AV1 TV)) for best

picture quality (for DVD and VCR features).

2 Use S-VIDEO Output for the better picture quality (for DVD

features only).

3 Use SCART Composite Output for good picture quality (for

DVD and VCR features).

4 If your TV only has a RF-style (Antenna IN or 75 ohm) input,

use the RF OUT for connection and set your TV to channel

22 ~ 69 with the same channel for DVD/VCR is set (for DVD

and VCR features).

Sound

Digital audio connections provide the clearest sound. Connect

the DVD/VCR DIGITAL AUDIO OUT (either COAXIAL or

OPTICAL) to your amplifier or receiver (for DVD features only).

2 Use SCART Output (DVD/VCR(AV1 TV)) for better sound

quality (for DVD and VCR features).

If digital connections are not possible, connect the DVD/VCR

ANALOG AUDIO OUT(Left and Right) to your amplifier,

receiver, stereo or TV (for DVD features only).

Warning!

– Never make or change connections with the power

switched on.

– Connect the DVD/VCR directly to your TV, instead of eg.

a VCR, to avoid distortion because DVD video discs are

copy protected.

– Do not connect the ANALOG AUDIO OUT of DVD/VCR

to PHONO IN of your amplifier or receiver.

– If you use the Euro audio/video cable, it is not necessary

to connect the analog audio cable.

English

Setting Up your DVD/ VCR

RF OUT

AERIAL

DVD

DVD/VCR

AV1(TV)

VCR

AV2(DECODER)

ANALOG

AUDIOOUT

DIGITAL

AUDIO OUT

S-VIDEO

OUT

COAXIAL

OPTICAL

RF OUT

AERIAL

DVD

DVD/VCR

AV1(TV)

VCR

AV2(DECODER)

ANALOG

AUDIOOUT

DIGITAL

AUDIO OUT

S-VIDEO

OUT

COAXIAL

OPTICAL

VIDEO

L/MONO

AUDIO

Antenna In

(on back of TV)

example only

Antenna

Indoor/Outdoor

(300 ohm)

Cable

(75 ohm)

ANT

CABLE

Back of DVD/VCR

Black RF

coaxial cable

(Supplied)

AERIAL

RF OUT

AERIAL

DVD

DVD/VCR

AV1(TV)

VCR

AV2(DECODER)

ANALOG

AUDIOOUT

DIGITAL

AUDIO OUT

S-VIDEO

OUT

COAXIAL

OPTICAL

STEREO

AUDIO (LEFT) IN

AUDIO (RIGHT) IN

RF OUT

AERIAL

DVD

DVD/VCR

AV1(TV)

VCR

AV2(DECODER)

ANALOG

AUDIOOUT

DIGITAL

AUDIO OUT

S-VIDEO

OUT

COAXIAL

OPTICAL

COAXIAL DIGITAL

AUDIO IN

OPTICAL DIGITAL

AUDIO IN

AUDIO RECEIVER

H9720ED.qx3 04.4.16 10:43 AM Page 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVP-620VR Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVP-620VR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info