Bedienungsanleitung Philips DVP-620VR (Seite 10 von 20) (Englisch)

584558

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Selecting the recording speed (SP or LP)

LP allows to double the recording duration on tape (for

example six hours instead of three hours on an E180 cassette).

1 Switch on the TV set. If required, select the programme

number for the DVD/VCR.

2 Press DISC/VCR MENU.The main

menu will appear.

3 Select “RECORD SETUP” using

K/L and confirm with B.

Select “RECORD SPEED” using

K/L.

5 Select the required recording speed

with B.

6 To end, press STATUS/EXIT.

“SP” / “LP” / “AUTO”

“SP”: Standard Play (normal recording speed) offers the usual

first-class picture quality.

“LP”: Long Play (half recording speed, double recording time).

6 hours can be recorded on a 3-hour cassette (E180)

with a somewhat reduced picture quality.

“AUTO”: AUTOmatic Long Play. If there is not enough space on

the tape to record a programmed recording in

standard speed, the recording is automatically done in

“LP” (Long Play). Otherwise, the recording speed will

be “SP” (Standard Play).

SELECT KL CHOOSE B

→ RECORD SPEED [SP]

DIRECT RECORD [OFF]

RECORD LINK [OFF]

END=EXIT

English

Searching for a tape position with picture

(scanning)

1 During playback, press

one or more times.

2 If you want to search in super high speed, press

once more. (This function will not operate for a cassette

recorded in SP mode in the NTSC standard.)

3 Press PLAY B to resume playback.

Still picture / slow motion

1 During playback, press PAUSE

to stop the tape and display a

still picture.

2 During playback, press SLOW to playback the tape in slow

motion.

3 Press PLAY B to resume playback.

Scanning and still/slow motion interferes with the picture

quality.The sound is switched off.This is not a fault in your

DVD/ VCR.

Index search

Every time a tape is recorded an index marking is written on

the tape.These marked positions can be found again quickly

and easily later.

1 To search for the previous marking, press INDEX 3 and then

. ‘Fr’ will appear on the display for 5 seconds, and then, the

remaining tape time will appear.

2 For the next marking, press INDEX 3 and then

.‘FF’ will

appear on the display for 5 seconds, and then, the remaining

tape time will appear.

3 As soon as the DVD/ VCR finds this marking, it automatically

switches to playback.

Manual Tracking

To manually adjust the tracking during playback and slow

motion playback, press P+/P

Tracking will return to Automatic Tracking Adjustment when

you press STOP C, insert a tape, or press PLAY B.

To r emove vertical jitter in a Still picture, press P+/P

General information

Use Manual Recording to make a spontaneous recording

(for example, a programme currently being shown).

If you want to start and stop a recording manually, read the

section Recording without automatic switch-off.

Read the section DIRECT RECORD if you want to record a

programme currently being shown.

Read the section Automatic controlled recording from a

satellite receiver (RECORD LINK), if you want a

recording to be controlled automatically by a satellite receiver.

Recording without automatic switch-off

1 Insert a cassette.

2 Use P+/P

to select the programme number you want to

record, for example,‘P01’.

3 To start recording, press RECORD I.

4 Stop recording with STOP C.

Lining up recordings (assemble cut)

When you add a further recording to a cassette, which already

has a recording on it, a short blank (flicker) can appear between

the old and the new recording or the picture itself can flicker.

To help reduce these from occurring, proceed as follows:

1 Find the tape position of the old recording where you want to

insert the new recording.

2 Look at the last minute of the old recording (playback).

3 Press PAUSE

at the tape position where the new recording

is to go and press RECORD I.

4 Now start recording as usual by pressing RECORD I on the

remote control.

5 Stop recording with STOP C.

Searching for tape position without picture

(forward wind and rewind)

1 Stop the tape with STOP C.

2 Press

.‘Fr’ or ‘FF’ will appear on the display for 5

seconds, and then, the remaining tape time will appear.

3 To stop the tape, press STOP C.

“PROTECTED CASSETTE CANNOT RECORD”

message briefly appeared in the TV screen, then the

cassette was ejected.

A cassette without its security tab was inserted.

Undo the erase protection.

VCR Playback VCR Manual Recording

H9720ED.qx3 04.4.16 10:43 AM Page 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVP-620VR Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVP-620VR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info