584558

Philips DVP-620VR Seite 12

12
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
6 When all inputs are correct, press STATUS/EXIT.
The programming information is stored in a Timer block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
‘ REC’ will light up on the DVD/ VCR.
OTR (One Touch Recording)
This function enables you to set a recording length simply by
pressing RECORD I.
1 Follow steps 1 to 2 in Recording without automatic
switch-off section.
2 Press RECORD I repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
• Recording stops when 0:00 is reached.
To check time remaining during an OTR
Press DISPLAY.
To change the recording length during an OTR
Press RECORD I repeatedly until the desired length appears.
To stop an OTR before recording is finished
Press STOP C.
To cancel the OTR but continue recording
Press RECORD I repeatedly until “REC” appears in the upper
left corner of the TV screen.
General information
Use a TIMER programming to automatically start and stop a
recording at a later time or date.The DVD/ VCR will switch to
the right programme number and begin recording at the
correct time.With this DVD/ VCR, you can pre-programme up
to eight recordings within a period of one year.To make a
programmed recording, your DVD/ VCR needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
* VPS or PDC on or off
This information is saved in a TIMER block.
12
English
What is “VPS/PDC”?
“VPS” (Video Programming System)/ “PDC” (Programme Delivery
Control) are used to control the start and duration of TV channel
recordings. If a TV programme starts earlier or ends later than
scheduled, the DVD/ VCR will turn on and off at the correct time.
What do I need to know about “VPS/PDC”?
Usually the VPS or PDC time is the same as the start time. But if
your TV guide shows a VPS or PDC time which is different from
the programme’s scheduled start time, e.g. 20.10 (VPS/PDC
20.14), you must enter the VPS/PDC time exact to the minute. If
you want a start time different from the VPS/PDC time, you must
switch VPS/PDC off.
Programming a recording
(with the “SHOWVIEW
TM
system”)
You no longer need to tediously enter the date, programme
number, start and end time.All the information needed for
programming is contained in the SHOWVIEW-programming
number.
You can find this SHOWVIEW number in most TV listing
magazines written next to the concerned programme.
1 Press SV/V+.
2 Enter the entire SHOWVIEW
number. This number is up to 9
digits long and can be found next
to the start time of the TV
programme in your TV listing magazine.
[e.g: 1-234-5 or 1 234 5]
If you make a mistake, you can clear your input with CLEAR.
3 Press SV/V+.
4 Select “ONCE”,“DAILY”, or “WEEKLY” recording with K/L.
Then press B.
5 The decoded data appears after confirmation.You can go back
to change the data. Select the corresponding input field using
B or CLEAR. Change the data with numerical key pads.
TM
ShowView system
ShowView No.
12345
– – – –
SET=SV/V+
CORRECT=CLEAR
END=EXIT
ShowView system
→ ONCE
DAILY
WEEKLY
SELECT
KL CHOOSE B
END=EXIT
“- -” appears at PROG.
• The programme number of the TV channel has not yet been
assigned to the SHOWVIEW number. Using numerical key pads,
select the corresponding programme number (name) of the TV
channel.
The following message appears on the screen:“ERROR”
• The entered SHOWVIEW number is incorrect. Correct your input
or end with STATUS/EXIT.
• Check the time/date (see chapter 'Installing your video', section
'Setting the time and date').
• A daily recording was entered for the wrong day. Daily
programming can only be used for recordings to be made from
Monday to Friday.
Switching on “VPS/PDC”
• Select “VPS/PDC” using B or CLEAR. Press 1 to switch off
“VPS/PDC” or press 2 to switch on “VPS/PDC”.
The following message appears on the screen:“TIMER
NOT COMPLETED”
• The channel is wrong.
Programming a recording
(without the SHOWVIEW system)
1 Press VCR, then DISC/VCR MENU.
2 Select “TIMER” with K/L.Then
press B.
3 Select “ONCE”,“DAILY”, or
“WEEKLY” recording with K/L.
Then press B.
If all Timer blocks are in use,“FULL”
will appear on the OSD.
4 Select the desired Timer block with
numerical key pads. (The flashing number indicates an empty
TIMER block.)
5 Enter the Start time (START) End time (STOP), Programme
number (PROG.),VPS/PDC information and the Date with
numerical key pads.
6 When all inputs are correct, press STATUS/EXIT.
The programming information is stored in a TIMER block.
7 Insert a cassette with an intact security tab (unprotected).
8 Press TIMER SET.
SELECT KL CHOOSE B
→ ONCE
DAILY
WEEKLY
TIMER LIST
END=EXIT
Error message: “FULL”
• If this error message appears after
pressing SV/V+, then all TIMER
blocks are already programmed.
No more recordings can be pro-
grammed. If you want to clear a
programmed recording (TIMER
block), select the programme
number on TIMER LIST menu and
press CLEAR.
Selecting ONCE/ DAILY/ WEEKLY recordings
“ONCE”: Recording once
“DAILY”: Repeated daily recordings
(Monday to Friday)
“WEEKLY”: Repeated weekly recordings
(every week on the same day)
Programme numbers of the “AV1”,“AV2” scart socket
and “AV3” (front AUDIO/ VIDEO in jacks)
You can also programme recordings from external sources via
scart socket AV1(TV),AV2 (DECODER) or AV3 (front AUDIO/
VIDEO in jacks). Select programme number “AV1” with 0.0.1,
“AV2” with 0.0.2 or “AV3” with 0.0.3.
Programming a Recording (TIMER)
H9720ED.qx3 04.4.16 10:43 AM Page 12
… 12 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips DVP-620VR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips DVP-620VR

Philips DVP-620VR Bedienungsanleitung - Deutsch - 20 seiten

Philips DVP-620VR Bedienungsanleitung - Holländisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info