Bedienungsanleitung Philips DVP-620VR (Seite 13 von 20) (Englisch)

584558

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

Other Functions

How to check, or delete a programmed

recording (TIMER)

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TIMER”, then

press B.

3 Press K/L to select “TIMER LIST”,

then press B.

4 Select timer block with B.

5 To cancel the recording, press CLEAR.

6 To end, press STATUS/EXIT.

7 Press TIMER SET.

SELECT KL CHOOSE B

ONCE

DAILY

WEEKLY

→ TIMER LIST

END=EXIT

How to change a programmed recording

(TIMER)

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “TIMER”, then

press B.

3 Press K/L to select “ONCE”,

“DAILY”, or “WEEKLY” recording

with K/L, then press B.

4 Select a TIMER block with

numerical key pads. (The flashing

number indicates an empty TIMER block.)

5 Press CLEAR to delete information and input correct

information with numerical key pads.

6 To end, press STATUS/EXIT.

7 Press TIMER SET.

ONCE

TIMER - 1 2 3 4 5 6 7 8 -

SELECT TIMER NUMBER

END=EXIT

Hint for Timer Recording

• If there is a power failure or the DVD/VCR is unplugged for

more than 1 minute, the clock setting and all timer settings

will be lost.

• If a tape ends during TIMER RECORDING, the DVD/VCR will

stop, eject the tape, and switch to the DVD mode

automatically as ‘ ’ blinks. (If the DVD power is off,

the DVD/VCR will become the STANDBY status).

• If a tape is not in the DVD/VCR or does not have a record

tab, ‘ ’ flashes and timer recording will not operate. Please

insert a recordable tape.

• When timer recordings are set, ‘ ’ will come on.To use the

DVD/VCR as usual until the time

for the recording, press TIMER SET so that ‘ ’ disappears.

Press VCR to choose VCR mode, then continue with the

other features as described in this manual.

Note:

- When all the programmed recording are finished, ‘’

will flash.

This is not a malfunction.

To use the DVD/VCR, press TIMER SET to turn off ‘’.

When the recording has been programmed in VCR mode,

“PRESS TIMER SET BUTTON FOR TIMER RECORDING”

appears on the screen.

* Press TIMER SET button to start the programming.

Error message:“FULL”

• If this error message appears after you select “ONCE”,“DAILY”,

or “WEEKLY” on TIMER menu and press B, then all TIMER

blocks are already programmed. No more recordings can be

programmed. If you want to clear or check a programmed

recording (TIMER block), select the programme number on

TIMER LIST menu and press CLEAR.

Switching the status display off or on

Along with the on screen menu, the status display also displays

information on the current operating status (counter, playback,

recording,TV channel, etc.) on the TV screen.You can switch

off the information about the operating status so that the

status display is not recorded when copying videocassettes.

Which settings can I choose?

“ON”: Shows the status display for a few seconds only.

“OFF”: Switches off the status display.

Blue Background on or off

If you want the TV screen to be solid blue when a weak signal is

received, set “BLUE BACKGROUND” to “ON”. The screen will

be blue and the sound will be muted. Or, if you want to receive

the weak signal, set “BLUE BACKGROUND” to “OFF”.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press B.

3 Press K/L to select “BLUE

BACKGROUND”, then press B.

4 Select “OFF” (no blue background)

or “ON” (blue background on)

with B.

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

STATUS DISPLAY [ON]

→

BLUE BACKGROUND

[ON]

CLOCK DISPLAY [ON]

END=EXIT

Clock Display

This function allows you to switch the DVD/VCR display off.

It is useful in case you feel disturbed by the display-brightness

while watching TV in a dark room. It also reduces the power

consumption.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press B.

3 Press K/L to select “CLOCK

DISPLAY”, then press B.

4 Select “OFF” (no clock display) or

“ON” (clock display on) with B.

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

STATUS DISPLAY [ON]

BLUE BACKGROUND

[ON]

→ CLOCK DISPLAY [ON]

END=EXIT

•

Reception of stereo broadcasts:

STEREO

LEFT

RIGHT

NONE

Display on

the TV screen

Mode

Stereo

Monaural

L Audio

R Audio

L Audio

R Audio

+R Audio

L+R Audio

AUDIO OUTPUT

• During playback of the recorded tape in Hi-Fi mode:

Mode

Stereo

Monaural

MIX

STEREO

LEFT

RIGHT

MONO

MIXED

Display on

the TV screen

Hi Fi L Audio

Hi Fi R Audio

Hi Fi L Audio

Hi Fi R Audio

Normal Audio

Hi Fi L Audio

Normal Audio

Hi Fi R Audio

Normal Audio

AUDIO OUTPUT

Selecting the sound channel

You can select the desired sound channel during playback or

while receiving TV channels via the DVD/ VCR.This allows you

to select a desired language for multi-language transmissions.

1 Press AUDIO.This will show the current sound setting.

2 Press AUDIO repeatedly until the desired setting appears in

the display.

•

During reception of bilingual broadcasts:

Display on

the TV screen

Mode

MAIN

SUB

MAIN

SUB

MAIN

SUB

MAIN

SUB

Main Audio

Sub Audio

Main Audio

Sub Audio

AUDIO OUTPUT

Timer block disappeared when I pressed B.

You have checked all the programmed recordings. If you want to

check them again, repeat steps 1 to 4.

1 Press VCR, then DISC/VCR MENU.

2 Press K/L to select “VCR SET UP”,

then press

3 Press K/L to select “STATUS

DISPLAY”, then press B.

4 Press K/L to select “ON” or

“OFF”, then press

5 To end, press STATUS/EXIT.

SELECT KL CHOOSE B

→STATUS DISPLAY [ON]

BLUE BACKGROUND

[ON]

CLOCK DISPLAY [ON]

END=EXIT

Programming a Recording (TIMER)

H9720ED.qx3 04.4.16 10:43 AM Page 13

Philips DVP-620VR Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVP-620VR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info