Bedienungsanleitung Philips HD 9040 (Seite 10 von 126) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

467899

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

6 Put ingredients in the bread pan in the order they are listed in the recipe.

- Always add yeast last. Make a hollow in the centre of the our and sprinkle the yeast in it.

Do not mix the yeast with any of the wet ingredients, otherwise the bread may nor rise properly,

especially when you use the timer.

- If an ingredient has to be added during the baking process, the appliance gives a short and long

beep three times and the message ‘ADD’ appears on the display. If you do not add an ingredient,

the appliance simply continues with the baking process.

7 Putthebreadpanintheappliance.Pushthebreadpanrmlydowntomakeitlockinto

position (Fig. 4).

If the bread pan is not assembled properly, the kneading blades do not work.

8 Fold down the handle of the bread pan and close the lid of the appliance.

Note: Lower the lid slowly. It is heavy.

9 Put the mains plug in the wall socket.

, The appliance beeps and ‘1’ appears on the display, which refers to the ‘Basic White’ program.

Selecting settings

1 Press the program selector until the display shows the number of the program that is

appropriate for the recipe you want to prepare (Fig. 5).

, Each time you press the program selector, the number on the display increases by 1.

, The display alternately shows the selected program number and the processing time.

Note: The appliance beeps when you accidentally press a wrong button, for instance when you press the

weight button during the Dough program.

2 Press the weight selector one or more times to select the appropriate loaf weight (Fig. 6).

Note: Weight selection is possible in programs 1-7. Three weight choices are available in programs 1-6

(750g, 1000g and 1250g) and two choices are available in program 7 (1000g and 1250g). The preset

weight for programs 1 to 8 is 1000g.

Make sure the selected weight is appropriate for the amount of ingredients of the selected

recipe, to prevent the bread from becoming too big or burning. See chapter ‘Standard bread

programs and recipes’ in the Additional Baking Information booklet.

For instance, when you select a weight of 1000g, the preset weight for white bread, use 600g or 4

cups of white our.

, The dot on the left side of the display indicates the selected weight. The display also shows

the number of the selected program (Fig. 7).

3 If desired, press the crust colour selector one or more times to select the appropriate crust

colour (Fig. 8).

For programs 1 to 8, the preset crust colour is medium.

, The dot on the right side of the display indicates the selected crust colour (Fig. 9).

, The baking time for the selected program, weight and crust colour appears on the display.

The baking time is shown in hours and minutes (Fig. 10).

4 Press the start/stop/cancel button to start the bread making process. (Fig. 11)

Note: In programs 3, 4 and 7, the appliance does not start mixing immediately, but preheats rst.

, Theprogressiconashes(Fig.12).

During the baking process, the appliance itself and the lid become extremely hot. Be careful not

to burn yourself.

ENGLISH10

4222.003.4017.3.indd 10 02-06-10 14:06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HD 9040 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HD 9040

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info