Bedienungsanleitung Philips HF3451 (Seite 9 von 40) (Holländisch)

49499

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Note: After you have set the time for the rst time, you have to press the ‘set time’ button before you can

adjust the time again. The time on the display starts ashing and arrows appear above and below the

time to indicate that the clock time can be set.

3 Whenyouhavesetthecorrecttime,pressthe‘settime’buttontoconrmthetime(Fig.6).

Thetimeonthedisplaystopsashingandthearrowsdisappear.

Note: If you do not conrm the time, the ashing stops and the arrows disappear after 10 seconds. This

indicates that the time has been set.

The appliance is now ready for use.

Using the appliance

Setting the alarm

When you set the alarm, you choose the light intensity level, the type of sound and the sound level.

The alarm is set when the light ring round the ALARM button burns. The light intensity slowly

increases to the chosen level during the last 30 minutes before the set alarm time. The sound slowly

increases in 90 seconds to the chosen level after the set alarm time.

Setting the alarm time

1 Pressthealarmtimebutton(*)tosetthealarm.(Fig.7)

Thealarmtimestartsashingandtwoarrowsappearaboveandbelowthealarm

time(Fig.8).

2 Usethe%andthe^buttonstosetthealarmtime,i.e.thetimeatwhichyouwishtoget

up.(Fig.9)

3 Pressthebuttonlongertoputthetimeforwardorbackwardmorequickly.

4 Pressthealarmtimebutton(*)againtoconrmthealarmtime.(Fig.7)

Thearrowsdisappearandthealarmtimestopsashing.

Note: If you do not conrm the alarm time, the ashing stops after 10 seconds. This means that the

alarm time has been set.

Setting the sound and the sound level

1 PresstheALARMbutton(Fig.10).

ThelightringroundtheALARMbuttongoeson(Fig.11).

Therstsoundsymbol(radiosymbolforHF3462/HF3461andgentlebeepsymbolfor

HF3451)ashesfor3secondsandthesoundcanbeheard.

2 PresstheALARMbuttonagainifyouwanttoselectanotherwake-upsound.Whenyouhave

foundthesoundyouwanttouse,donotpresstheALARMbuttonagain(Fig.10).

After3seconds,thesymbolofthesoundselectedstopsashingtoindicatethatithasbeen

selected.

Thealarmhasbeensetandcontinuestoworkuntilyouswitchoffthealarmfunction.When

youdothis,thesoundsymboldisappearsfromthedisplayandthelightringroundthe

ALARMbuttongoesout.Seealsosection‘Switchingthealarmonoroff’.

3 Turnthevolumecontrolwheel$tosetthesoundlevel.(Fig.12)

The

$appearsonthedisplay.(Fig.13)

4 Ifyouwantnosoundatwake-uptime,selectlevel0.

Setting the light intensity level

1 Usethelightadjustmentwheel@tosetthelightintensitylevel.(Fig.14)

The

@appearsonthedisplay.

ENGLISH 9

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HF3451 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HF3451

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info