Bedienungsanleitung Philips HF3451 (Seite 10 von 40) (Holländisch)

49499

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Tip: We advise a light intensity between 9 and 20 (for the HF3451 with 75W lamp) or between 7 and

15 (for the HF3462/HF3461 with 100W lamp) for the alarm function. Set the light intensity to your

own preference by trying out the alarm function at different light intensity levels.

2 Ifyoudonotwantthelighttogoonatwake-uptime,selectlightintensitylevel0.

Quick alarm check

1 PresstheQUICKCHECKbuttontostartanacceleratedwake-upalarmtest(Fig.15).

ThelightringroundtheQUICKCHECKbuttongoeson(Fig.16).

Duringtherst50secondsofthetest,youseearapidincreaseofthelightintensitytothe

selectedlevel.Duringthelast40seconds,youheartheselectedsoundgraduallyincreaseto

theselectedlevel.

2 PresstheQUICKCHECKbuttonagaintostopthetest(Fig.15).

ThelightringroundtheQUICKCHECKbuttongoesout.

Note: The appliance continues to run the accelerated wake-up alarm test until you press the QUICK

CHECK button.

Switching the alarm on or off

The light ring round the ALARM button burns when the alarm is on. At the set time, the wake-up

sound is played and the lamp has reached the selected light intensity level.

1 Pressthe3buttontoswitchoffthelightandthewake-upsound.(Fig.17)

ThelightringroundtheALARMbuttoncontinuestoburn.Thealarmfunctionisstillactive

andthewake-upalarmwillgooffatthesettimeandwiththesetsoundandlightintensity

thenextday(Fig.11).

2 Pressthe#buttonifyouwanttoswitchoffthesoundwhenthealarmgoesoff.(Fig.18)

3 Pressthe@&buttonifyouwanttoswitchoffthelampwhenthealarmgoesoff.(Fig.19)

4 Ifyouwanttoswitchoffthealarmfunctionaltogether,presstheALARMbuttononeor

moretimesuntilthereisnosoundsymbolonthedisplayandthelightringroundthe

ALARMbuttongoesout.

Snoozing

1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoswitchoffthesoundfor9

minuteswhenthealarmhasgoneoff(Fig.20).

The lamp continues to burn at the selected intensity level. After 9 minutes, the wake-up sound is

automatically played again.

2 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttonlongertodimthelight.

Note: You can only do this once. After you release the button, it functions as SCREEN BRIGHTNESS

CONTROL button again.

Note: You can only use the snooze function within 15 minutes after the alarm starts to go off. After those

15 minutes, the button no longer functions as SNOOZE button and only functions as

SCREEN BRIGHTNESS CONTROL button.

Adjusting the light intensity during the wake-up phase

1 Turnthelightadjustmentwheel@toselectahigherorlowerlightintensity.(Fig.14)

The lamp burns at the selected intensity during the rest of the wake-up phase.

Adjusting the brightness of the display

1 PresstheSNOOZE/SCREENBRIGHTNESSCONTROLbuttontoadjustthebrightnessof

thedisplay(Fig.20).

ENGLISH10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HF3451 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HF3451

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info