Bedienungsanleitung Philips HTB3550 (Seite 35 von 42) (Englisch)

546290

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

33EN

Discdoesnotplayhigh-denitionvideo.

• Make sure that the disc contains high-

denition video.

• Make sure that the TV supports high-

denition video.

• Use an HDMI cable to connect to the TV.

Sound

No sound from home theater speakers.

• Connect the audio cable from your home

theater to your TV or other devices.

However, you do not need a separate

audio connection when the home theater

and TV are connected through an HDMI

ARC connection.

• Set up the audio for the connected device

(see 'Set up the audio' on page 11).

• Reset your home theater to its factory

settings (see 'Restore default settings' on

page 26), and then switch it off and switch

on again.

• On your home theater, press SOURCE

repeatedly to select the correct audio

input.

Distorted sound or echo.

• If you play audio from the TV through the

home theater, make sure that the TV is

muted.

Audio and video are not synchronized.

• 1) Press .

2) Press the Navigation buttons (left/right)

to select [Audio sync], and then press

OK.

3) Press the Navigation buttons (up/

down) to synchronize the audio with

the video.

Play

Cannot play a disc.

• Clean the disc.

• Make sure that the home theater supports

the type of disc (see 'Media formats' on

page 28).

• Make sure that the home theater supports

the region code of the disc (see 'Region

codes' on page 28).

• If the disc is a DVD±RW or DVD±R disc,

make sure that it is nalized.

CannotplayaDivXle.

• Make sure that the DivX le is encoded

according to the 'Home Theater Prole'

with the DivX encoder.

• Make sure that the DivX le is complete.

DivX do not display correctly.

• Make sure that the subtitle le name is

the same as the movie le name (see

'Subtitles' on page 16).

• Select the correct character set:

1) Press .

2) Select [Character set].

3) Select the supported character set.

4) Press OK.

Cannot read the contents of a USB storage

device.

• Make sure that the format of the USB

storage device is compatible with the

home theater.

• Make sure that the le system on the USB

storage device is supported by the home

theater.

'No entry' or 'x' sign appears on the TV.

• The operation is not possible.

EasyLink does not work.

• Make sure that the home theater is

connected to a Philips brand EasyLink TV,

and the EasyLink option is turned on (see

'Set up EasyLink (HDMI-CEC control)' on

page 10).

• For TVs from different manufacturers, the

HDMI CEC could be called differently. Check

theTV user manual on how to enable it.

When you switch on the TV, the home theater

automatically switches on.

• This behavior is normal when you are using

Philips EasyLink (HDMI-CEC). To make the

home theater work independently, switch

off EasyLink.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips HTB3550 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips HTB3550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info