Bedienungsanleitung Philips Laserfax 855 (Seite 13 von 48) (Englisch)

44379

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1. Installation

Chapter 1. Installation

1 Adjusting the paper width: Pull out both of

the side borders. Turn the borders around so that

the imprint LT R faces inward toward the paper.

Insert the side borders back into position; they

must snap securely into place within the mount-

ings. Always turn around both side borders!

Now you can use letter-sized paper, as well as legal-sized

paper since both formats have the same width. If you

would like once again to use A4 paper, simply turn the

side borders back around so that the imprint A4 can be

seen.

2 Adjusting the paper length: Press the arrow key

located at the bottom of the paper tray. Pull out the

front portion of the paper tray until the arrow key

locks into position at the point labelled LGL. Now

you can load paper in legal format into the paper

tray. Press the paper tray together until the arrow key

snaps into position at the point labelled LT R ; now

you can load in paper in letter format. For A4 paper,

the arrow key must be snapped into position within

the ﬁ eld that is labelled as A4.

Special Telephone

Connections

ISDN Systems

Your fax machine is an analogue fax machine (Group 3).

It is not an ISDN fax machine (Group 4), and therefore

it cannot be operated directly on an ISDN connection.

In order to do this, you need either an analogue adapter

or a connection for analogue terminals. For additional in-

formation, please consult the user manual of your ISDN

system or ask your telephone service provider.

Private Branch Exchange / PABX

Private branch exchanges (PABX) are customary in all

larger businesses. Before making a telephone call or send-

ing a fax, you must press an outside line access code in or-

der to get a connection to the public telephone network

from a private branch exchange.

1 Press MENU/OK,

and OK. Select net-

work

type with

. Conﬁ rm with OK.

2 Select pstn or pabx with

3 Conﬁ rm with OK. Pressing C will return you to the

previous menu step; pressing STOP will return you

to the root menu.

If you are operating the fax machine within a PABX, use

function 15 to set the machine to the appropriate length

for internal numbers and to set the code that must be

dialled in order to access a public telephone line.

1 Press MENU/OK,

and OK. Select Prefix

with

. Conﬁ rm with OK.

2 Input the appropriate length for internal numbers.

 e default is 10. Delete the digits with the

key.

Assume the longest internal number, then add one

digit to that. For example, if your direct dial num-

bers consist of four digits, then you should input

3 Conﬁ rm with OK.

4 Input the outside line access code that is required in

order to reach the public telephone network. In most

cases, this will be

. (If necessary, you may want to

ask your telephone system provider.)

5 Conﬁ rm with OK. Pressing C will return you to the

previous menu step; pressing STOP will return you

to the root menu.

Once these settings are in place, you will no

longer need to preﬁ x the outside line access

code every time you enter an external number.  e

fax machine will automatically add the outside

line access code in front of numbers that are longer

than the conﬁ gured direct dial numbers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Laserfax 855 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Laserfax 855

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info