Bedienungsanleitung Philips Laserfax 855 (Seite 40 von 48) (Englisch)

44379

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

40 Chapter Appendix

work from a private branch exchange, one

must dial a number or press a key before

the actual telephone number; in most

cases this is zero (see Outside Line Access

Code).

Pulse Dialling: see Tone Dialling

Resolution: Number of dots per inch (dpi).

For sending and receiving faxes, the reso-

lution options available are Normal, Fine,

SFine and Photo. For copying, the avail-

able resolutions are Fast, Quality and Pho-

to.  e higher the resolution, the longer it

takes to complete the transmission.

Scanning:  e reading of a document into

the fax memory or into the computer in

order to send it, copy it or edit it.

Sender Identification:  e telephone

number and name of the sender as well

as the date and time of the fax transmis-

sion appear in the upper margin of each

received fax.

Serial Connection: see Additional De-

vices

Soft Modem:  e machine does not con-

tain a ﬁ xed, built-in modem. A program

executes the modem function on demand

and accesses the machine memory (RAM).

 e features and functions of the soft mo-

dem can be modiﬁ ed by altering the soft-

ware (see Hard Modem, see Modem).

Stand-alone: Single work station that is

not connected to other workstations over

a network.

Sub-address: see Fax Polling

Time Stamp (Laserfax 855):  e exact

date and time of receipt appear in the page

header of each received fax. A memory

buﬀ er guarantees that exact data are issued

even after a power loss. In this way, you

can verify exactly when a fax has reached

you.

Tone Dialling (also Dual Tone Multi-

Frequency):

In many countries, tone

dialling has replaced pulse dialling, in

which each number was sent as a cor-

responding number of pulses. With tone

dialling, a speciﬁ c tone is assigned to each

key (referred to as DTMF tones).

Toner Level Memory: Update the toner

level memory of your fax machine with

the Plug’n’Print card that is included

with each new toner cartridge. Your fax

machine registers the extent of toner used

for every print-out and calculates the toner

level of the toner cartridge on that basis.

 e indicated toner level is only meaning-

ful if you update each new toner cartridge

with the Plug’n’Print card that is provided

with the cartridge.

Transfer Speed: CCITT/ITU has pub-

lished international standards for the

transmission of data over telephone lines.

All short names begin with V, so these are

also referred to as V standards.  e most

important transmission speeds for fax

transmissions are:

V.17 – 7,200 to 14,400 bps

V.21 – maximum 300 bps

V.22 – maximum 1,200 bps

V.22 bis – maximum 2,400 bps

V.27 ter – maximum 4,800 bps

V.29 – maximum 9,600 bps

V.32 bis – maximum 14,400 bps

V.34 – maximum 33,600 bps

Warm-Up Phase: Normally, the machine

is in the energy saving mode (see Energy

Saving Mode). In the warm-up phase, the

fax machine heats up the printing unit un-

til it has reached the necessary operating

temperature, after which the copy or fax

can be printed out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Laserfax 855 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Laserfax 855

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info