Bedienungsanleitung Philips mc 10 (Seite 12 von 20) (Englisch)

158682

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

3140 115 27752

Compact Disc

SELECT

SOURCE

TIMER

ON • OFF

INTERACTIVE SOUND

STANDBY

SHUFFLE

REPEAT

RDS

BAND

PREV NEXT

TUNING

DBB

DSC

PRESETSTOP PLAY•PAUSE

SENSOR

VOLUME

INCREDIBLE SURR.

CLOCK

PROGRAM

IMPORTANT:

The lens of the CD player should never be

touched.

Playing a disc

This CD player plays Audio Discs including CD-

Recordables and CD-Rewritables.

¶ CD-ROM, CD-I, CDV, VCD, DVD or computer

CDs, however, are not possible.

1 Select CD source.

2 Press OPEN•CLOSE on the top

of the system to open the CD

compartment.

➜ OPEN is displayed when you

open the CD compartment.

3 Insert a disc with the printed side

facing up and press down on OPEN•CLOSE

to close the CD door.

➜ READ is displayed as the CD player scans the

contents of a disc, and then the total number of

tracks and playing time are shown.

4 Press PLAY•PAUSE 2; (on the remote

control 2) to start playback.

➜ Current track number and elapsed playing

time of the track are displayed during disc

playback.

5 To interrupt playback press PLAY•PAUSE 2;

(on the remote control SIDE/;). Press

PLAY•PAUSE 2; (on the remote control 2)

again to resume play.

➜ The display freezes and the elapsed playing

time flashes when playback is interrupted.

6 To stop disc playback, press STOP 9.

Note: CD play will also stop when;

– the CD door is opened.

– the disc has reached the end.

– you select another source: TAPE, TUNER or AUX.

– you select to standby.

– you press the tape deck PLAY

key.

Selecting a different track

¶ Press PREV ¡1 or NEXT 2™ on the system,

(on the remote control ¡ or ™) once or

repeatedly until the desired track number

appears in the display.

¶ If you have selected a track number shortly after

loading a disc or in the PAUSE position, you will

need to press PLAY•PAUSE 2; (on the

remote control 2) to start playback.

Finding a passage within a track

1 Press and hold down on PREV ¡1 or NEXT

2™.

➜ The disc is played at high speed and low

volume.

2 When you recognise the passage you want,

release PREV ¡1 or NEXT 2™.

➜ Normal playback continues.

Note:

– During a disc programme or if SHUFFLE/

REPEAT active, searching is only possible within the

same track.

Different play modes: SHUFFLE

and REPEAT

You can select and change the various play modes

before or during playback. The play modes can

also be combined with PROGRAMME.

SHUFFLE ......... tracks of the entire disc/

programme are played in

random order

SHUFFLE and REPEAT ALL…to repeat the

entire disc/ programme

continuously in random order

REPEAT ALL ...repeats the entire disc/

programme

REPEAT ............plays the current track

continuously

OPEN • CLOSE

pg 001-020/MC10/22-Eng 12/7/00, 1:29 PM12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips mc 10 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips mc 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info