Bedienungsanleitung Philips mc 10 (Seite 14 von 20) (Englisch)

158682

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

3140 115 27752

Tuner

PROGRAM

INTERACTIVE SOUND

STANDBY

SHUFFLE

REPEAT

RDS

BAND

PREV NEXT

TUNING

DBB

DSC

PRESETSTOP PLAY•PAUSE

SENSOR

VOLUME

INCREDIBLE SURR.

CLOCK

TIMER

ON•OFF

TIMER

SELECT

SOURCE

PROGRAM

TUNER

Tuning to radio stations

1 Select TUNER source.

➜ TUNER is displayed briefly.

2 Press BAND once or more to select your

waveband.

3 Press down on TUNING à or á and release

button.

➜ The radio automatically tunes to a station

with sufficient reception. Display indication during

automatic tuning: SEARCH.

➜ If a FM station is received in stereo, STEREO is

shown.

4 Repeat step 3 if necessary until you find the

desired station.

¶ To tune to a weak station, press TUNING à

or á briefly and repeatedly until you have

found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations

in the memory.

Automatic programming

Automatic programming will start with a chosen

preset number. From this preset number

upwards, former programmed radio stations will

be overridden. The system will only programme

stations which are not in the memory already.

1 Press PRESET 4 or 3 ( ¡ or ™ on the

remote control) to select the preset number

where programming should start.

Note:

– If no preset number is selected, default is preset

(1) and all your presets will be overridden.

2 Press PROGRAM on the system or remote

control for more than 2 seconds to activate

programming.

➜ AUTO is displayed and available stations are

programmed in order of waveband reception

strength: FM followed by MW and LW. The last

preset automatically stored will then be played.

Manual programming

1 Tune to your desired station (see Tuning to radio

stations).

2 Press PROGRAM on the system or remote

control to activate programming.

➜ PROGRAM flashes in the display.

3 Press PRESET 4 or 3 (¡ or ™ on the remote

control) to allocate a number from 1 to 40 to

this station.

4 Press PROGRAM again to confirm the setting.

➜ PROGRAM disappears, the preset number and

the frequency of the preset station are shown.

5 Repeat the above four steps to store other

stations.

¶ You can override a preset station by storing

another frequency in its place.

Tuning to preset stations

¶ Press PRESET 4 or 3 ( ¡ or ™ on the

remote control) until the desired preset station

is displayed.

RDS (some versions only)

Radio Data System is a service that allows

FM stations to show additional information. If

you are receiving a RDS station, and the

station name are displayed.

When automatic programming is used, RDS

stations will be programmed first.

Scrolling through different RDS

information

¶ Press RDS briefly and repeatedly to scroll

through the following information (if available):

– Station name

– Programme type such as NEWS, SPORT,

POP M ...

– Radio text messages

– Frequency

pg 001-020/MC10/22-Eng 12/7/00, 1:29 PM14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips mc 10 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips mc 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info