Bedienungsanleitung Philips NPX520 Neopix (Seite 17 von 27) (Englisch)

811244

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Change settings 17

Change projector settings

1 Press on the remote control or

on the projector to access the projector's

settings menu.

2 Use the navigation buttons and the OK

button to select a menu item.

3 Press / or / to select a value for the

menu item.

4 Press the OK button to make the change.

Note: For some menu items such as Digital

Zoom, the change takes effect once you

select a different value.

5 Press on the remote control or

on the projector to exit the projector's

settings menu.

Input source settings

You can view and change the following input

source settings.

• Android TV: Select this to use the built-in

Android TV Dongle as the input source. This

is the default input source.

• HDMI1: Select this to use the device

connected to the projector's HDMI 1 port as

the input source.

• HDMI2: Select this to use the device

connected to the projector's HDMI 2 port

as the input source.

• USB-C: Select this to use the device

connected to the projector's USB-C port as

the input source.

• EasyLink (CEC): Choose to enable or

disable HDMI™ CEC (Consumer Electronics

Control). The default value is Disabled. Tip:

Both the HDMI™ ports on the projector

support HDMI™ CEC.

• HDMI Mode: Choose which HDMI™ mode

to use.

• Normal (Video): Use the normal video

range (16-235) commonly used with

most media devices.

• Extended (PC): Use the extended video

range (0-255) used with PC devices.

Tip: Choose "Normal" mode unless your

external device requires "Extended" mode

to display correctly. Refer to the user

manual of the external device for more

information.

Picture settings

You can view and change the following picture

settings.

• Picture Mode: You can set the projector

to use the following picture modes,

depending on your viewing environment or

preferences. After selecting a picture mode,

you can modify its settings.

• Standard: Display the picture with

normal brightness, contrast, saturation,

hue and sharpness levels.

• Vivid: Sharpen the image by increasing

the contrast, saturation and sharpness.

• Movie: Optimize the settings for movies.

• User: Define your own settings.

• Color Temperature: You can set the

projector to use the following color

temperature types. After selecting a color

temperature type, you can modify its

settings.

• Cool: Make the picture more bluish.

• Standard: Use a moderate color

temperature.

• Warm: Make the picture more reddish.

• User: Define your own settings.

• Brightness: Adjust the screen's overall

brightness.

• Contrast: Adjust the contrast of the bright

and dark areas of the image.

• Saturation: Adjust the intensity of the

colors.

• Hue: Adjust the hue of the colors.

• Sharpness: Adjust the sharpness of the

image.

• Red Gain: Adjust the gain for red.

• Green Gain: Adjust the gain for green.

• Blue Gain: Adjust the gain for blue.

• Noise Reduction: Turn off noise reduction

or set its level to Low, Middle or High.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips NPX520 Neopix Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips NPX520 Neopix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info