Bedienungsanleitung Philips NPX520 Neopix (Seite 18 von 27) (Englisch)

811244

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

18 Philips · NeoPix 520

• Reset to Default: Select Yes to reset all the

picture settings above.

Sound settings

You can view and change the following sound

settings.

• Sound Mode: You can set the projector to

use the following sound modes, depending

on your environment, audio type or

preferences.

• Music: Optimize the bass and treble

levels for music.

• Movie: Optimize the bass and treble

levels for movies.

• User: Define your own bass and treble

levels.

• Output: Select the projector's audio output

type.

• Internal Speaker: Use the projector's

internal speaker to output audio.

• ARC: Use an HDMI™ ARC compatible

device to output audio. To learn how

to connect such a device, see Connect

to a device through HDMI™ ARC, page

14.

• Volume: Adjust the volume of the projector.

Tip: To adjust the volume of Android TV,

exit the projector's settings menu and press

the volume control buttons on the remote

control.

• Bass: Set the bass level. This menu item

is enabled only when the sound mode is

User.

• Treble: Set the treble level. This menu item

is enabled only when the sound mode is

User.

• Stereo Balance: Adjust the stereo balance

to compensate for volume differences

between the left and right speakers at the

listening position.

• Reset to Default: Select Yes to reset all the

sound settings above.

Image settings

You can view and change the following image

settings.

• Location: You can select a location and

then modify the image settings. All the

modified image settings will be associated

with the selected (current) location. You

can create up to 3 different sets of image

settings this way and quickly switch

between them by selecting a location. Tip:

The projector always selects the last used

location after being restarted.

• Room 1: Select this to use or modify the

image settings for Room 1.

• Room 2: Select this to use or modify

the image settings for Room 2.

• Room 3: Select this to use or modify the

image settings for Room 3.

• Install Mode: Adjust the projection to

the correct direction based on how the

projector is installed.

• Aspect Ratio: Toggle between the available

aspect ratios (16:9 and 4:3). Choose Auto

to let the projector automatically use the

recommended aspect ratio.

• V/H Keystone: Select this to manually make

the image rectangular by adjusting the

horizontal and vertical keystone angles.

• Four Point Keystone: Select this to manually

make the image rectangular by moving four

corners of the image.

• Digital Zoom: Scale down the screen to up

to 50% of its full size. The default value is

100% (no scale-down).

• Reset to Default: Select Yes to reset all the

image settings above for all the locations

(Rooms 1, 2 & 3).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips NPX520 Neopix Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips NPX520 Neopix

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info