Bedienungsanleitung Philips sacd 1000 (Seite 4 von 107) (Englisch)

138193

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

4 GENERAL INFORMATION

Important safety instructions

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a

damp cloth for cleaning.

Exception: A product that is meant for uninterrupted service

and that for some specific reason, such as the possibility of the

loss of an authorization code for a CATV converter, is not

intended to be unplugged by the user for cleaning or any other

purpose, may exclude the reference to unplugging the appliance

in the cleaning description otherwise required in item 5.

6. Attachments - Do not use attachments not recommended

by the video product manufacturer as they may cause hazards.

7. Water and Moisture - Do not use this video product near

water - for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

8. Accessories - Do not place this video product on an

unstable cart, stand, tripod, bracket, or table. The video

product may fall, causing serious injury to a child or adult, and

serious damage to the appliance. Use only with a cart, stand,

tripod, bracket, or table recommended by the manufacturer or

sold with the video product. Any mounting of the appliance

should follow the manufacturer’s instructions and should use a

mounting accessory recommended by the manufacturer.

8A. An appliance and cart combination should be

moved with care. Quick stops, excessive force,

and uneven surfaces may cause the appliance and

cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provided

for ventilation, to ensure reliable operation of the video

product, and to protect it from overheating. These openings

must not be blocked or covered. The openings should never

be blocked by placing the video product on a bed, sofa, rug, or

other similar surface. This video product should never be

placed near or over a radiator or heat register. This video

product should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your

home, consult your appliance supplier or local power company.

For video products intended to operate from battery power,

or other sources, refer to the operating instructions.

11. Polarization - This product may be equipped with a

polarized alternating-current line plug (a plug having one blade

wider than the other). This plug will fit into the power outlet

only one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the plug. If the

plug should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the

polarized plug.

12. Power-Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes,

and requirements for the grounding electrode. See Fig.A.

14. Lightning - For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power surges.

15. Power lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this product through openings as they may touch dangerous

voltage points or short-out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the product.

18. Servicing - Do not attempt to service this product yourself,

as opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified service

personnel.

19. Damage Requiring Service - Unplug this product from the

wall outlet and refer servicing to qualified service personnel

under the following conditions

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled on, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to its normal operation.

e. If the product has been dropped or the cabinet has been

damaged.

f. When the product exhibits a distinct change in performance

- this indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufactu-rer or which have the same

characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs

to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating

condition.

22. Carts and Stands - The appliance should be used only with

a cart or stand that is recommended by the manufacturer.

23. Heat - The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products that produce heat.

ANTENNA LEAD

IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING AS

PER NATIONAL ELECTRICAL CODE (NEC)

00_SACD_USA_COV_23801_D1 11-12-2000 15:52 Pagina 4

Philips sacd 1000 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips sacd 1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info