Bedienungsanleitung Philips SRU 3004 (Seite 4 von 23) (Englisch, Französisch, Spanisch)

105795

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Setup

Battery Installation

1. On the back of the remote,

push down on the tab and

lift the cover off.

2. Match the batteries to the

+ and - marks inside the

battery case, then insert 2

AAA Alkaline batteries.

3. Press the battery cover

back into place.

Battery Saver

Your remote automatically turns off if the buttons are

depressed more than 30 seconds. This will save your

batteries should your remote get stuck in a place where

the buttons remain depressed (e.g., between the sofa

cushions).

Code Saver

You will have up to 10 minutes to change the batteries

in your remote without losing codes you have

programmed. However, do not press any buttons until

batteries are installed in the remote. If buttons are

pressed without batteries in the remote, all codes will be

lost.

Power-On Default

The remote powers on in TV mode.

Code Setup

The SETUP button is used to setup the remote. You can

either setup the remote using the code for your brand of

product, from the code tables (on separate sheet), or

you can search through the library of codes until you

find a code that works for your product.

Please refer to “Programming with Code Search” on page

8 for more information on using the code search feature

to learn how to search through the library of codes for

your products.

NOTE: You can store any kind of code under any mode

(except TV). I.E. you can store a VCR code under the

CBL button, or a DVD code under the VCR button, etc.

However, you can only store TV codes under the TV

button.

Button Functions, cont.

DVD Functions

SCAN+ and SCAN- buttons control the speed of Fast

Forward and Reverse Playback respectively.

CHAPTER+ and CHAPTER- buttons respectively

locate the succeeding or preceding Chapters or Tracks

on a disc.

SUBTITLE button turns the subtitles on or off.

REPEAT button performs DVD players “A-B Repeat” (or

RPT A.B) function for repeat play of current Chapter or

Track.

INFO/SELECT button brings up DVD Display or

Control Menu for Chapter/Track/Title number, Time

remaining/elapsed indication, system information, etc.

QUIT button is used to Exit or Clear on-screen Menu

displays.

PLAY button is used to start Disc playback and for

Menu selection on some DVD players.

STOP button stops Disc playback.

PAUSE button pauses Disc playback - press PLAY to

resume.

INPUT button activates the DVD Players SETUP Menu.

SAT Functions

GUIDE button displays on-screen Satellite Channel

Guide.

CHAPTER+ and CHAPTER- buttons perform the

“Page+” and “Page-” function for on-screen Guide

Menus used by some Satellite systems.

INFO/SELECT button brings up Satellite Display screen

for current Channel and system information.

MENU brings up the Satellite Menu screen - use with the

UP, DOWN, LEFT & RIGHT navigation buttons.

OK button is used for on-screen Menu selection.

QUIT button is used to Exit or Clear on-screen Menu

displays.

INPUT button performs the Satellite TV/SAT function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SRU 3004 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips SRU 3004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info