Bedienungsanleitung Philips SRU 3004 (Seite 5 von 23) (Englisch, Französisch, Spanisch)

105795

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Most users will store VCR codes under the VCR button,

Cable codes under CABLE, etc. If (for example) you

want to store a VCR code under CABLE, first follow the

procedure for Direct Code Entry (previous page) and

press CABLE in step 2 of Direct Code Entry, then enter

ANY VCR code in step 3 of Direct Code Entry. Then

follow the steps above for Code Search (or Brand

Search, below). Note: If the device does not have a

CHANNEL UP button, use PLAY (VCR only) or

POWER instead. Code Search starts from the currently

stored 4 digit number under that mode.

Code Search, cont.

Code Search by Brand

Lets you search for a code for a specific Brand within

the Code Library for a particular manufacturer.

1. Turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold the SETUP button until the red

indicator remains on, then release SETUP button.

3. Press and quickly release the desired mode button

(TV, VCR, etc.). The red indicator blinks off once.

4. Press and release the numeric button (0-9)

corresponding to desired Manufacturer (see table on

code list sheet). The red indicator blinks off once.

Note, pressing “0” performs a full library search same

as normal Code Search Method on previous page.

5. Press the CHANNEL UP button ((or POWER or

PLAY (VCR only)) repeatedly until the device to be

controlled changes channel. The red indicator blinks

off with each button press. If you accidentally

overshoot the code required, press the CHANNEL

DOWN button to backtrack through the library until

the device changes channel. Pressing CHANNEL

UP changes direction to forward again.

6. Press and release MUTE to install the code.

Brand Search Method entry is now complete.

Note: When all codes under a Brand have been searched

the red indicator flashes rapidly for 3 seconds.

Direct Code Entry

1. Press and hold the SETUP button until the red

indicator stays on, then release the SETUP button.

2. Press and release the desired mode button (TV,

VCR, etc.). The red indicator blinks, then stays lit.

3. Enter the 4 digit code from the code tables (on

separate sheet). Note: after a valid code entry, the

red indicator turns off. For an invalid code, the red

indicator flashes.

4. With your device on, press CHANNEL UP. If the

device responds, no further programming is required.

Note: If some buttons do not operate your equipment,

try one of the other codes for your brand.

Write your codes down here for easy reference later.

Code Search

If your product does not respond after you have tried all

the codes for your brand, or if your brand is not listed,

try searching for your code by following these steps.

1. Manually turn on the device (TV, VCR, etc.) to be

controlled.

2. Press and hold the SETUP button until the red

indicator stays on, then release the SETUP button.

3. Press and quickly release the desired mode button

(TV, VCR, etc.). The red indicator blinks off once.

4. Press the CHANNEL UP button repeatedly (up to

300 times) until the device to be controlled changes

channel. The red indicator blinks off with each

button press. If you accidentally overshoot the

code required, press the CHANNEL DOWN button

to backtrack through the library until the device

changes channel. Pressing CHANNEL UP changes

direction to forward again.

5. Press and release MUTE to install the code.

Type Type stored Code

TV TV

VCR

DVD

SAT/CBL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips SRU 3004 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips SRU 3004

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info