Bedienungsanleitung Philips VR110 (Seite 29 von 39) (Englisch)

54447

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

— 30 —

Timer Recording

To record while you’re away, follow step

1 — 10 below. For each programme you

set, the VCR will turn on, start recording,

and turn off automatically. You can store

up to 8 programmes.

Make sure....

• The clock is set to the correct time

before setting timer recording.

• A cassette is inserted in the VCR and

the record tab of the cassette must

not be removed.

• The remote control operation mode

is set correctly for operating your

target component.

– Press VCR to operate the VCR.

– Press TV to operate the TV.

FOR EACH STEP BELOW, YOU

NEED TO FINISH WITHIN 60

SECONDS; OTHERWISE,

PROGRAMMING WILL HAVE TO

BE RESTARTED FROM STEP 1.

1Select Timer Mode

Press VCR.

2 Press

TIMER.

The Timer

Recording

menu app-

ears.

2Select Programme mode

Press

5 or ∞

to select

“QUICK -

PROG-

RAMM-

ING” t

hen

press

OK/

STATUS

The Quick Programming menu

appears.

• If you have already made 8

programmes, “ALL PROGRAMS IN

USE” appears and goes back to the

Timer Recording menu. If this

happens, delete unwanted programmes.

(✈P.20)

3Select Channel Position

Press CH 5

or ∞ to

enter the TV

channel.

• Holding

down CH 5

or ∞ rapidly

scans throu-

gh the chan-

nels.

DVANCED

PERATIONS

(CONTINUED)

4Select Start Time

Press START

+ or – (Num-

ber button 1

or 4).

• Each time

you press

the button,

the set

time changes

by 1-minute intervals. If you hold the

button, the set time changes by 30-minute

intervals.

5Select Stop Time

Press STOP

+ or –

(Number

button 2 or 5).

• Each time

you press

the button,

the set time

changes by 1

minute intervals. If you hold the button,

the set time changes by 30-minute

intervals.

6Select Tape Speed

Press ALT/

SPEED.

• Each time

you press

the button,

the tape

speed alter-

nates

between

“SP” and “LP”.

7Set VPS/PDC Mode

Press VPS/PDC (Number button 7) to

set “VPS/PDC” to “ON” or “OFF”.

(✈“VPS/PDC Recording” on page 32).

8Select Start Date

Press DATE +

or – (Number

button 3 or 6).

• The year and

day of the

week is dis-

played auto-

matically.

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- - -

START+/- - -:- -

STOP +/- - -:- -

REC SPEED SP

VPS/PDC OFF

DATE +/- - -/- -/- -

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- 12

START+/- - -:- -

STOP +/- - -:- -

REC SPEED SP

VPS/PDC OFF

DATE +/- - -/- -/- -

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- 12

START+/- 20:00

STOP +/- - -:- -

REC SPEED SP

VPS/PDC OFF

DATE +/- - -/- -/- -

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- 12

START+/- 20:00

STOP +/- 22:00

REC SPEED SP

VPS/PDC OFF

DATE +/- - -/- -/- -

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- 12

START+/- 20:00

STOP +/- 22:00

REC SPEED LP

VPS/PDC OFF

DATE +/- - -/- -/- -

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

ONE TIME PROGRAM

PROGRAM 1

TV PROG +/- 12

START+/- 20:00

STOP +/- 22:00

REC SPEED LP

VPS/PDC ON

DATE +/- 14/07/00

FRIDAY

DAILY: 8 WEEKLY: 9

CONFIRM: OK

END : TIMER

9Confirm Programme

Press OK/STATUS or TIMER.

“PROGRAM WAS COMPLETED”

appears on the TV screen.

After 5 seconds, the above message

disappears, and the normal TV picture

resumes. The

(Timer) indicator

lights up on the display.

• If “PROGRAM NOT COMPLETED”

appears, try again from step 1.

• If “ PROGRAM OVERLAPPED”

appears, the timer recording you just

programmed overlaps another timer

recording. The Program Review screen

will appear with a magenta line blinking.

To change any item on the overlapping

programs, see page 31.

If you want to store other

programmes, repeat steps 1 to 9.

10 Finish Settings

Press POWER (or STANDBY/ON on

the front panel) to turn off the VCR.

The VCR must be turned off for a timer

recording to take place. If you forget to

turn off the VCR, “PLEASE TURN

OFF VCR FOR TIMER

RECORDING” flashes on your TV

screen two minutes before a timer

recording starts. To remove the

message, press the CLEAR button.

If you want to record the same

programme daily, press DAILY

(Number button 8) during step 3

through 8. (Press the button again to

cancel).

The VCR will record a TV programme

every day (Monday through Friday) at

the same time and length (Daily

Recording).

If you want to record the same

programme weekly, press WEEKLY

(Number button 9) during step 3

through 8. (Press the button again to

cancel).

The VCR will record a TV programme

once a week at the same day, time and

length (Weekly Recording).

After a timer recording has

taken place

Press POWER (or STANDBY/ON on

the front panel) to turn on the VCR.

You can operate your VCR normally.

To stop a started timer recording

Press POWER (or STANDBY/ON on

the front panel).

Recording stops and the VCR turns off.

If it is a Daily or Weekly Recording,

future recordings will be carried out as

programmed.

• To record from external line input, press

CH 5 or ∞ until “A/V1 REAR”, “A/V2

REAR”, “A/V FRONT”, OR

“S-2 VIDEO” appears.

\ SHOWVIEW

QUICK PROGRAMMING

PROGRAM REVIEW

SELECT : 5∞ CONFIRM : OK

END : TIMER

Untitled-2 16/08/2000, 15:3830

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips VR110 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips VR110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info