Bedienungsanleitung Piazzetta P960 (Seite 19 von 64) (Englisch)

643476

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

The wood pellet is obtained by pressing wood sawdust left over from

the working of natural dried wood. The typical small, cylindrical form is

obtained by passing the material through a die. Thanks to lignin, a natural

element which is released during the pressing of the raw material, the

pellets acquire a good consistency and compactness without requiring

treatment with additives or caking agents.

There are various types of pellet on the market with qualities and

characteristics that vary depending on the processes they have

undergone and the type of wood used in their production.

Since the characteristics and quality of the pellet considerably

affect stove performance, efciency and proper operation, we

recommend that you use high-quality pellets.

Gruppo Piazzetta S.p.A has tested and programmed its stoves and

can ensure best performance and trouble-free operation using

pellets with the following specic characteristics:

Pellet characteristics

Components natural pure wood pellet

Length, approx. ¼” – 1 ¼” / (7 – 30 mm)

Diameter, approx. 0.23” – 0.25” / (6 – 6.5 mm)

Apparent density, approx. 40.5 lb/ft

/ (650 kg/m

)

Net heat value, approx. 8000 BTU/lb / (5 kWh/kg)

Moisture content, approx. < 8%

Residual ash, approx. < 0,5%

N.B. the above data refer to beech/r wood pellets

To ensure trouble-free operation:

DO NOT use pellets with dimensions other than those recommended by

the manufacturer.

DO NOT use poor quality pellets containing sawdust, bark, maize, resins

or chemical substances, additives or adhesives.

DO NOT use damp pellets.

To prevent accidents or damage to the product we recommend the following:

- unpacking and installation must be carried out by at least two people;

- every operation involving movement of the product must be carried out with the proper tools in full compliance with current safety regulations;

- the packaged product must be kept in the position according to the directions shown by the diagrams and notices on the pack;

- if ropes, straps or chains are used, ensure that they are able to take the weight of the pack and that they are in good condition;

- use slow continuous movements when moving the pack to avoid jerking the ropes, chains, etc.;

- do not tilt the package excessively to avoid toppling;

- never stand in the vicinity of loading/unloading equipment (forklift trucks, cranes etc).

a Unpack the product being careful not to damage or scratch it, take the accessories pack and any pieces of polystyrene or cardboard

used to wedge moveable parts etc. out of the stove rebox.

Keep packaging (plastic bags, polystyrene, etc.) out of reach of children, since it could be a potential source of danger, and dispose

of according to local regulations.

a Installation and assembly of the stove must be carried out by qualied personnel.

Choosing other and unsuitable pellets

- obstructs the grate and ue gas pipes;

- increases fuel consumption;

- reduces efciency;

- means that proper stove operation cannot be guaranteed;

- causes dirt to build up on the glass;

- leaves particles which have failed to burn and heavy cinders.

The presence of moisture in the pellets increases their volume and

causes them to split which in turn causes:

- malfunction of the fuel-loading system;

- inefcient combustion.

Pellets should be stored in a sheltered, dry place.

To use good quality pellets with dimensions and heat-producing

properties other than those recommended above, it will be necessary to

change the stove operating parameters.

a The use of cordwood is prohibited. Do not burn garbage or

ammable uids such as gasoline, naphtha or engine oil.

a This “customisation” of stove settings must be carried out by

specially qualied personnel authorised by Gruppo Piazzetta

S.p.A.

a Using pellets that are out of date or not in conformity with

the manufacturer’s recommendations not only damages the

stove and jeopardises its performance, but can render the

guarantee null and void and relieves the manufacturer of all

liability.

3.0 FUEL

4.0 PREPARING FOR INSTALLATION

H07028100/DT2000970 – 01

English

DT2010233-04

DT2010074-06

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Piazzetta P960 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info