Bedienungsanleitung Pinarello Nytro Dust 2021 (Seite 14 von 30) (Englisch)

780497

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

6. GENERAL NOTE ON ASSEMBLY AND

SET-UP

Your Pinarello Nytro Dust bicycle is a high-performance, complex machine. For this reason, the

assembly and set-up require specific knowledge of the cycle and its technologies, as well as

special tools and mechanical skills, available only from authorised Pinarello dealers.

This manual is not intended as a comprehensive use, repair, maintenance or

service manual. Please contact your Pinarello dealer for all service, repairs

or maintenance. Authorised Pinarello dealers provide highly qualified and

trained personnel and updated documentation concerning components and

the pedal assist system.

The Pinarello Nytro Dust frame does not require any preliminary or post

purchase preparation. Do not remove, drill, or modify any parts of your frame.

Failure to follow this instruction could result in sudden breakage, personal

injuries, and will void the warranty.

SUSPENSION FEATURES AND ADJUSTMENT

Make sure that the suspension never reaches the end of its travel, as this could cause damage to

components or the system as a whole. Suspension affects your riding behaviour, making it very

important to provide proper adjustment.

Similarly to tire pressure, it would be impossible to provide absolute recommendations on

adjusting the suspension. Above all, we recommend that you remain aware of these components.

The more you pay attention to and sense the behaviour of the suspension, the greater will be your

sensitivity in adjustment, allowing you to find the best setup to support and excel in your riding.

FRONT FORK

To adjust the fork pressure and all detailed settings, we recommend that you rely on your

trusted Pinarello dealer, who has the necessary expertise and tools to ensure perfect tuning. You

can find more detailed information on the adjustment, use and maintenance of the fork in the

manufacturer’s manual.

REAR SUSPENSION

To adjust the pressure and all detailed settings of the rear suspension, we recommend that you

rely on your trusted Pinarello dealer, who has the necessary expertise and tools to ensure perfect

tuning. You can find more detailed information on the adjustment, use and maintenance of the

rear suspension in the manufacturer’s manual.

TIRE PRESSURE

For best performance, check that the tires are inflated to a pressure between 1.5 and 2.2 bar (22-32

psi). In any case, we recommend that you adjust the pressure to your skills and driving sensations.

It is impossible to identify a single correct adjustment of tire pressures for each individual user,

because both the user and the terrain are important factors that have to be taken into account for

this kind of determination.Especially when using the bike for the first time, we suggest that you ask

your trusted Pinarello dealer for advice on correct tire pressure.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pinarello Nytro Dust 2021 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pinarello Nytro Dust 2021

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info