Bedienungsanleitung Pioneer AVH-P5000DVD (Seite 74 von 98) (Englisch)

454824

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

3 Touch START to start the test tone out-

put.

The test tone is outputted. It rotates from

speaker to speaker in the following sequence

at intervals of about two seconds. The current

settings for the speaker over which you hear

the test tone are shown in the display.

FRONT L (front speaker left)—CENTER (center

speaker)—FRONT R (front speaker right)—

REAR R (rear speaker right)—REAR L (rear

speaker left)—SUB WOOFER (subwoofer)

Check each speaker output level. If no adjust-

ments are needed, perform step 5 to stop the

test tone.

# The settings do not appear for speakers

whose size is set OFF. (Refer to Setting the speak-

er setting on page 72.)

4 Touch c or d to adjust the speaker out-

put level.

Each time you touch c or d increases or de-

creases the speaker output level. +10 to –10 is

displayed as the level is increased or de-

creased.

# The test tone rotates to the next speaker after

about two seconds from the last operation.

5 Touch STOP to stop the test tone out-

put.

Notes

! If needed, select speakers and adjust their ‘ab-

solute’ output levels. (Refer to Adjusting the

speaker output levels on the previous page.)

! To adjust the speaker output levels in this

mode is the same as making the speaker out-

put levels at SPEAKER LEVEL. Both provide

the same results.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGNMENT.

3 Touch any of the following touch panel

keys to select the time alignment.

! INITIAL – Initial time alignment (factory set-

ting)

! AUTO TA – Time alignment created by auto

TA and EQ. (Refer to Auto TA and EQ (auto-

time alignment and auto-equalizing) on

page 76.)

! CUSTOM – Adjusted time alignment that

you can create for yourself

! OFF – Turn the time alignment off

! ADJUSTMENT – Adjust the time alignment

as desired

# You cannot select AUTO TA if auto TA and EQ

has not been carried out.

# You cannot select ADJUSTMENT when

neither FRONT-L nor FRONT-R is selected in

POSITION.

Adjusting the time alignment

You can adjust the distance between each

speaker and the selected position.

! An adjusted time alignment is memorized

in CUSTOM.

1 Touch NEXT on the DSP function menu.

2 Touch TIME ALIGNMENT and then

touch ADJUSTMENT.

# You cannot select ADJUSTMENT when

neither FRONT-L nor FRONT-R is selected in

POSITION.

3 Touch a or b to select the speaker to

be adjusted.

Each time you touch a or b selects the speak-

er in the following order:

FRONT L (front speaker left)—CENTER (center

speaker)—FRONT R (front speaker right)—

REAR R (rear speaker right)—REAR L (rear

speaker left)—SUB WOOFER (subwoofer)

# You cannot select speakers whose size is set

at OFF. (Refer to Setting the speaker setting on

page 72.)

Available accessori es

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-P5000DVD Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-P5000DVD

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info