Bedienungsanleitung Pioneer AVH-X2800BT (Seite 39 von 57) (Englisch)

649371

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

This function is not available while you make or receive a call

using the hands-free function.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Loudness].

3 Touch the item.

The following items are available:

Off, Low, Mid, High.

Setting the subwoofer output

This product is equipped with a subwoofer output mechanism,

which can be turned on or off.

The default setting is “On”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Subwoofer] to switch “On” or “Off”.

Adjusting the cutoff frequency

value

You can adjust the cutoff frequency value of each speaker.

The following speakers can be adjusted:

Standard Mode: Front, Rear, Subwoofer.

Network Mode: High, Mid, Subwoofer.

“Subwoofer Settings” is available only when “Subwoofer”

is “On”.



Refer to Setting the subwoofer output on page 39

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Crossover] or [Subwoofer Settings].

3 Touch or to switch the speaker.

4 Drag the graph line to set the cutoff position.

5 Drag the lowest point of the graph to set the

cutoff slope.

p The following items can also be set.



⁂⁚⁓⁥⁗

Switches the subwoofer phase between normal and reverse

position.



LPF/HPF:

Switches the LPF/HPF setting to “On” or “Off”.

When it is turned off, the high-pass filter or low-pass filter of

each speaker can also be turned on by touching the graph

lines.

This function is not available when adjusting the High

speaker.

Switching the rear speaker

output

p This function is available when “Standard Mode” is selected

as the speaker mode.

The default setting is “Rear”.

1 Turn the source off.

 Refer to Selecting a source on page 9

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

3 Touch [Rear Speaker Output].

4 Touch to switch “Rear” or “Subwoofer”.

Using BASS Boost

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Bass Boost].

3 Touch to select the bass boost level from 0 to

+6.

Selecting the listening position

You can select a listening position that you want to make as the

centre of sound effects.

The default setting is “Off”.

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Listening Position].

3 Touch the desired position to change the lis-

tening position.

The following items are available:

Off, Front-L, Front-R, Front, All.

“All” is not available when “Network Mode” is selected as

the speaker mode.

Adjusting the speaker output

levels nely

Fine adjustments of the speaker output level can be made by

listening to audio output.

This function is available when “Subwoofer” is set to “On”.



Refer to Setting the subwoofer output on page 39

1 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

2 Touch [Speaker Level].

3 Touch or to select the listening position

if necessary.

The following items are available:

Off, Front-L, Front-R, Front, All.

The default setting is “Off”.

“All” is not available when “Network Mode” is selected as

the speaker mode.

If you change the listening position setting, the output

levels of all the speakers will change in conjunction with the

setting.

4 Touch or to adjust the speaker output

level.

p “–24” dB to “10” dB is displayed as the level to be corrected

is increased or decreased.

The following speakers are available:

Standard Mode: Front Left, Front Right, Rear Left, Rear Right,

Subwoofer

Network Mode: High Left, High Right, Mid Left, Mid Right,

Subwoofer

To use this function, the vehicle’s acoustics must be meas-

ured in advance.

Adjusting the time alignment

By adjusting the distance from each speaker to the listening

position, time alignment is able to correct the time required for

sound to reach the listening position.

1 Measure the distance between the head of the

listener and each speaker unit.

2 Display the “Audio” setting screen.

 Refer to Displaying the “Audio” setting screen on page 38

3 Touch [Time Alignment].

4 Touch or to select the listening position

if necessary.

The following items are available:

< CRB4721-B >

Audio adjustments

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X2800BT Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X2800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info