Bedienungsanleitung Pioneer AVH-X3500DAB (Seite 3 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

528308

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

< CRD4846-A >

English

Connecting the power cord

Aerial jack

Vehicle Bus adapter input

Please refer to the instruction manual for the Vehicle Bus adapter (sold separately).

Power supply

Power cord

Vehicle Bus conversion cable 15.8 cm

Connection method

1. Clamp the lead.

2. Clamp firmly with

needle-nosed pliers.

Note:

· The position of the parking brake switch depends on the vehicle model. For details,

consult the vehicle Owner’s Manual or dealer.

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio Mute lead on

that equipment. If not, keep the Audio Mute lead free of any connections.

Light green (PARKING BRAKE)

Used to detect the ON/OFF status of the parking brake. This lead

must be connected to the power supply side of the parking brake

switch.

Blue/white

Connect to system control terminal of the

power amp (max. 300 mA 12 V DC).

Blue/white (6*)

Connect to auto-antenna relay control terminal

(max. 300 mA 12 V DC).

The pin position of the ISO

connector will differ depending on

the type of vehicle. Connect 5* and

6* when Pin 5 is an antenna control

type. In another type of vehicle,

never connect 5* and 6*.

Blue/white (5*)

Ground side

Power supply side

Parking brake

switch

ISO connector

Note:

In some vehicles, the ISO connector may be divided into

two. In this case, be sure to connect to both connectors.

Note:

Depending on the kind of vehicle,

the function of 2* and 4* may be

different. In this case, be sure to

connect 1* to 4* and 3* to 2*.

Connect leads of the same

color to each other.

This product

Microphone

Violet/white

Of the two lead wires connected to the back lamp, connect the one in which the

voltage changes when the gear shift is in the REVERSE (R) position. This connection

enables the unit to sense whether the car is moving forwards or backwards.

4 m

Please contact your dealer to

inquire about the connectable

navigation unit.

Wired remote input

Hard-wired remote control adapter can be connected (sold separately).

Speaker leads

White: Front left

White/black: Front left

Gray: Front right

Gray/black: Front right

Green: Rear left 

Green/black: Rear left 

Violet: Rear right 

Violet/black: Rear right 

Pioneer

navigation

system

RGB cable (supplied with navigation system)

Fuse (10 A)

Yellow (2*)

Back-up

(or accessory)

Yellow (1*)

Connect to the constant 12 V

supply terminal.

Red (4*)

Accessory

(or back-up)

Red (3*)

Connect to terminal controlled by

ignition switch (12 V DC).

Black (ground)

To vehicle (metal) body.

Orange/white

To lighting switch terminal.

Note

Make sure to connect the microphone supplied with this product when using Android Auto.

CRD4846-A_3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X3500DAB Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X3500DAB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info