Bedienungsanleitung Pioneer AVH-X8800BT (Seite 37 von 60) (Englisch)

649256

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

the model, refer to the information on our website.

Displaying obstacle detection

information

CAUTION

This function is intended solely to assist the driver’s vision.

It does not detect all dangers and obstacles and is not a

substitute for your attentiveness, judgement, and care while

parking your vehicle.

This function is only available for vehicles equipped with a

parking sensor system.

The “Parking Assist” screen is not displayed until this

product boots up completely.

1 Turn on the parking assist sensor on your

vehicle.

The “Parking Assist” screen appears.

Displaying the operating status

of the climate control panel

When you operate the climate control panel of the vehicle, the

screen switches automatically to the “A/C Control” screen.

The settings of the climate control panel operated before this

product is started are not displayed on the screen.

Any climate control panel settings of the vehicle that are

turned off are not displayed on the screen.

If the information displayed on the screen is reversed for

the left and right sides of the vehicle, change the “Climate

Reverse” setting to “On”.



Refer to Reversing the climate control status display on

page 39

Displaying the “System” set-

ting screen

1 Press the button.

2 Touch , and then .

Setting Bluetooth audio source

activation

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [AV Source Settings].

3 Touch [Bluetooth Audio] to switch “On” or

“Off”.

Setting the ever scroll

When “Ever Scroll” is set to “On”, the recorded text information

scrolls continuously in the display while the vehicle is stopped.

The default setting is “Off”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Ever Scroll] to switch “On” or “Off”.

Setting the beep tone

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Beep Tone] to switch “On” or “Off”.

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required

for utilising the rear view camera function. (For details, consult

your dealer.)

Rear view camera

This product features a function that automatically switches to

the full-screen image of the rear view camera installed on your

vehicle, when the gearstick is in the REVERSE (R) position.

Camera View mode also allows you to check what is behind you

while driving.

Camera for Camera View mode

Camera View can be displayed at all times. Please note that

with this setting, the camera image is not resized to fit, and that

a portion of what is seen by the camera is not viewable.

To display the camera image, touch [Camera View] on the AV

source selection screen.



Refer to Source on the AV source selection screen on page

To set the rear view camera as the camera for Camera View

mode, set “Back Camera Input” to “On”.

When using the 2nd camera, set “AV Input” to “Camera”.

CAUTION

Check to make sure settings for rear view camera displays a

mirror reversed image.

Immediately verify whether the display changes to a

rear view camera image when the gearstick is moved to

REVERSE (R) from another position.

When the screen changes to full-screen rear view camera

image during normal driving, switch to the opposite setting

in “Reverse Gear Setting.”.

If you touch while the camera image is displayed, the

displayed image will turn off temporarily.

When the camera view of both the rear view camera and 2nd

camera are available, the key to switch the display appears.

Touch this key to switch the display between the rear view

image and 2nd camera image.

Setting rear view camera activation

The default setting is “Off”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [Back Camera Input] to switch “On” or

“Off”.

Setting the polarity of the rear view

camera

The default setting is “Battery”.

System settings

< CRB4770-A >

Vehicle equip-

ment information

System settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8800BT Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info