Bedienungsanleitung Pioneer AVH-X8800BT (Seite 38 von 60) (Englisch)

649256

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [Reverse Gear Setting.].

 Battery:

The polarity of the connected lead is positive.



Ground:

The polarity of the connected lead is negative.

If no camera connection is made and the camera polarity

setting is wrong, a black screen is displayed as the rear view

camera image immediately after startup. In such a case,

press and hold the MUTE button to release the rear view

camera screen and then change the camera polarity setting

to “Battery”.

Setting the reversed image display

for the rear view image

You can set whether to reverse the rear view camera images to

be displayed on the front screen.

The default setting is “Off”.

This setting is available only when you stop your vehicle in a

safe place and apply the handbrake.

This function is available when “Back Camera Input” is set

to “On”.



Refer to Setting rear view camera activation on page 37

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [Back Camera: Reverse Video] to switch

“On” or “Off”.

Setting the parking assist guidelines

Displaying the parking assist

guidelines

You can set whether to display the parking assist guidelines on

the rear view camera images when backing up your vehicle.

The default setting is “Off”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [Parking Assist Guide] to switch “On” or

“Off”.

Adjusting the parking assist

guidelines

CAUTION

 When adjusting the guidelines, be sure to park the vehicle

in a safe place and apply the handbrake.



Before getting out of the car to place the markings, be sure

to turn the ignition switch off (ACC OFF).



The range projected by the rear view camera is limited.

Also, the vehicle width and distance guidelines displayed

on the rear view camera image may differ from the actual

vehicle width and distance. (The guidelines are straight

lines.)



The image quality may deteriorate depending on the usage

environment, such as at night or in dark surroundings.

1 Park your vehicle in a safe place and apply the

handbrake.

2 Using packing tape or similar, place markings

as follows.

Rear bumper

25 cm

50 cm

2 m

Markings

3 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

4 Touch [Camera settings].

5 Touch [Parking Assist Guide Adjust].

6 Set the guidelines by dragging the four points.

Adjust the guidelines so that the guidelines can be overlaid to

the markings

Touch / / / / / to adjust the guidelines if

necessary. Touch [Default] to reset the settings.

Setting the second camera

You can view images of the second camera (a front camera etc.)

on the screen of this product.

Setting the second camera activation

The default setting is “Off”.

This function is synchronized with “AV Input” setting.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [2nd Camera Input] to switch “On” or

“Off”.

Setting the reversed image

The default setting is “Off”.

This setting is available only when you stop your vehicle in a

safe place and apply the handbrake.

This function is available when “AV Input” is set to

“Camera” or “2nd Camera Input” is set to “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].

3 Touch [2nd Camera: Reverse video] to switch

“On” or “Off”.

Setting the camera for Camera

View mode

To display Camera View at all times, “Camera View” needs to be

set to “On”. (The same mode is turned on when

is touched

on the camera view screen. The setting value is synchronized.)

The default setting is “Off”.

To set the rear view camera as the camera for Camera View

mode, set “Back Camera Input” to “On”.



Refer to Setting rear view camera activation on page 37

When using the second camera, set “AV Input” to

“Camera” or “2nd Camera Input” to “On” (both settings are

synchronized).

< CRB4770-A >

System settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVH-X8800BT Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVH-X8800BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info