Bedienungsanleitung Pioneer AVIC-F9220BT (Seite 145 von 200) (Englisch)

454858

145

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

2 Touch [AV2 Input].

Each touch of [AV2 Input] changes the set-

ting as follows:

! Off: No video component is connected.

! EXT: Pioneer external unit connected with

the RCA video cable (for AVIC-F20BT)

! Video: External video component

Changing the wide screen mod e

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the “AV Sys-

tem Settings” screen on the previous page.

2 Touch [Wide Mode].

Each touch of [Wide Mode] changes the set-

ting as follows:

! Full (full)

A 4:3 picture is enlarged in the horizontal

direction only, enabling you to enjoy a 4:3

TV picture (normal picture) without any

omissions.

! Cinema (cinema)

A picture is enlarged by the same propor-

tion as Full or Zoom in the horizontal direc-

tion and by an intermediate proportion

between Full and Zoom in the vertical di-

rection; ideal for a cinema-sized picture

(wide screen picture) where captions lie

outside the frame.

! Zoom (zoom)

A 4:3 picture is enlarged in the same pro-

portion both vertically and horizontally;

ideal for a cinema-sized picture (wide

screen picture).

! Normal (normal)

A 4:3 picture is displayed normally, giving

you no sense of disparity since its propor-

tions are the same as that of the normal

picture.

p Different settings can be stored for each

video source.

p The same setting is automatically applied

for the following grouping.

! DVD-V and DivX

! AV1 and AV2

! EXT1 and EXT2 (for AVIC -F20BT)

p When video is viewed in a wide screen

mode that does not match its original as-

pect ratio, it may look strange.

p Remember that use of this system for com-

mercial or public viewing purposes may

constitute an infringement on the author’s

rights protected by the Copyright Law.

p The navigation map and the rear view cam-

era picture is always viewed at Full.

Setting the rear output

The navigation system’s rear output can be

used for a full-range speaker or subwoofer

connection. If you switch Rear SP to Sub. W,

you can connect a rear speaker lead directly to

a subwoofer without using an auxiliary amp.

Initially, the navigation system is set for a rear

full-range speaker connection (Full).

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting. (When you use the product

without RCA rear output, this setting only

applies to the rear speaker leads.)

p “Rear SP” can be set only when the source

is selected to “Off”.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the “AV Sys-

tem Settings” screen on the previous page.

2 Touch [Rear SP].

Each touch of [Rear SP] changes the settings

as follows:

! Full

When no subwoofer is connected to the

rear output, select “Full”.

! Sub. W

When a subwoofer is connected to the rear

output, select “Sub. W”.

Engb

145

Chapter

Customising preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-F9220BT Seite 145

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-F9220BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info