Bedienungsanleitung Pioneer AVIC-F9220BT (Seite 146 von 200) (Englisch)

454858

146

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

Switching the muting/

attenuation timing

You can mute the AV source volume or attenu-

ate the output signal. This setting is invalid for

the mute signal that has been received from

the MUTE lead connected to the navigation

unit. (Even if this setting is “Off”, the naviga-

tion system will mute or attenuate the audio

source volume when the signal is output via

MUTE lead.)

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the “AV Sys-

tem Settings” screen on page 144.

2 Touch [Mute].

Each touch of [Mute] changes the settings as

follows:

AVIC-F20BT

! Guide/Tel/VR: The volume is muted or atte-

nuated according to the following condi-

tions.

— When the navigation outputs the gui-

dance voice.

— When you use a mobile phone via Blue-

tooth technology (dialling, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Tel/VR: The volume is muted or attenuated

according to the following conditions.

— When you use a mobile phone via Blue-

tooth technology (dialling, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Off: The volume does not change.

AVIC-F920BT, AVIC-F9210BT, AVIC-F9220BT

! Guide/Tel: The volume is muted or attenu-

ated according to the following conditions.

— When the navigation outputs the gui-

dance voice.

— When you use a mobile phone via Blue-

tooth technology (dialling, talking, in-

coming call).

! Tel: The volume is muted or attenuated

when you use a mobile phone via Bluetooth

technology (dialling, talking, incoming call).

! Off: The volume does not change.

p AV source volume returns to normal when

the corresponding action is ended.

Switching the muting/

attenuation level

You can select the muting/attenuation level of

“Mute”. This setting is also effective for a

mute signal that has been received from the

MUTE lead connected to the navigation unit.

p This menu is not available when AV source

is “Off”.

1 Display the “AV System Settings”

screen.

= For details, refer to Displaying the “AV Sys-

tem Settings” screen on page 144.

2 Touch [Mute Level].

Each touch of [Mute Level] changes the set-

tings as follows:

! 20dB: The volume becomes 1/10.

! 10dB: The volume becomes 1/3.

! All: The volume becomes 0.

p When you select “All”, no audio adjust-

ments are possible during the sound is

turned off.

p When you select “20dB” or “10dB”,no

audio adjustments are possible during the

sound is attenuated.

p AV source volume returns to normal when

the corresponding action is ended.

p Even when a mute signal has been received

from MUTE lead connected to the naviga-

tion unit, navigation voice guidance cannot

be attenuated or muted.

Switching Auto PI seek

The navigation system can automatically

search for a different station with the same

programming, even during preset recall.

Engb

146

Chapter

Customising preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-F9220BT Seite 146

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-F9220BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info