Bedienungsanleitung Pioneer AVIC-HD3 II (Seite 135 von 193) (Englisch)

491808

135

Zoom out

Zoom in

Vorherige Seite

1/193

Nächste Seite

% Touch [Mute Set] in System Settings

menu.

Each touch of [Mute Set] changes the set-

tings as follows:

! Guide/Tel/VR — The volume is muted or at-

tenuated according to the following condi-

tions

— When the navigation outputs the gui-

dance voice.

— When you use a mobile phone via Blue-

tooth technology (dialling, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Tel/VR — The volume is muted or attenu-

ated according to the following conditions

— When you use a mobile phone via Blue-

tooth technology (dialling, talking, in-

coming call).

— When the voice recognition mode is ac-

tivated.

! Off — The volume does not change

p Operation returns to normal when the cor-

respond action is ended.

p The navigation voice guidance itself cannot

be attenuated or muted. If you want to mute

the navigation guidance voice temporarily,

use

on the navigation map screen.

Switching the muting/

attenuation level

You can select the muting/attenuation level of

[Mute Set]. This setting is also effective for a

mute signal that has been received from the

MUTE lead connected to the navigation unit.

p This menu is not available in the following

cases:

— Audio source is [OFF]

— During muting/attenuation

% Touch [Mute Level] in System Settings

menu.

Each touch of [Mute Level] changes the set-

tings as follows:

! All — The volume becomes 0

! –20dB — The volume becomes 1/10

! –10dB — The volume becomes 1/3

p When you select [All], [Mute] is displayed

and no audio adjustments are possible dur-

ing the sound is turned off.

p When you select [–20dB]or[–10dB], no

audio adjustments, except volume control,

are possible during the sound is attenu-

ated.

p Operation returns to normal when the cor-

respond action is ended.

p Even when a mute signal has been received

from MUTE lead connected to the naviga-

tion unit, navigation voice guidance cannot

be attenuated or muted. If you want to mute

the navigation guidance voice temporarily,

use

on the navigation map screen.

Changing the voice output of

the navigation guidance

You can set the speaker to output the naviga-

tion guidance and phone voice, etc.

% Touch [Guide/Tel SP] in System Settings

menu.

Each touch of [Guide/Tel SP] changes the set-

tings as follows:

! Left SP — Uses only the front left speaker

! Right SP — Uses only the front right speak-

! L+R SP — Uses both the front right and left

speakers

Switching the auto aerial setting

If the blue lead of the navigation system is

connected to the aerial control terminal of the

vehicle, select either of the following settings.

! Power — The aerial extends or turns on

when the ignition switch is turns on. The

aerial is stored or turned off when the igni-

tion switch is turned off.

! Radio — The aerial extends or turns on

only when the audio source is FM or AM.

The aerial is stored or turned off when the

source is switched to another.

Customising the Audio Setting related with Audio Visual

Engb

135

Chapter

Customising the Audio Setting related with Audio Visual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer AVIC-HD3 II Seite 135

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer AVIC-HD3 II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info