Bedienungsanleitung Pioneer DEX-P99RS (Seite 53 von 75) (Englisch)

491816

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

! Device info. is the same as that of the Blue-

tooth audio. (Refer to Displaying BD (Bluetooth

Device) address on page 50.)

! PH.B.Name view (phone book name view)

cannot be selected for cellular phone regis-

tered guest phone.

! If cellular phone is connected to this unit via

Bluetooth wireless technology with HSP

(Head Set Profile), PH.B.Name view,

Clear memory, Number dial and

Refuse calls cannot be selected.

! If you do not operate functions other than

Search&Connect, Connection open,

Connect phone, PH.B.Transfer,

Disconnect phone, Number dial and

Clear memory within about 30 seconds, the

display automatically returns to the ordinary

display.

Connecting a cellular phone

Searching for available cellular phones

1 Use MULTI-CONTROL to select

Search&Connect in the function menu.

Refer to Function and operation on the previous

page.

2 Press MULTI-CONTROL to search for

available cellular phones.

While searching, Searching flashes. When

available cellular phones featuring Bluetooth

wireless technology are found, device name or

Name not found (if names cannot be ob-

tained) is displayed.

# If this unit fails to find any available cellular

phones, Not found is displayed.

3 Push MULTI-CONTROL up or down to

select a device name you want to connect.

# Push MULTI-CONTROL left or right to switch

the BD address and device name.

4 Press MULTI-CONTROL to connect the

selected cellular phone.

While connecting, Connecting flashes. To

complete the connection, check the device

name (Pioneer BT Unit) and enter the link

code on your cellular phone. If the connection

is established, Connected is displayed.

# PIN code is set to 0000 as the default. You

can change this code. Refer to Entering PIN code

for Bluetooth wireless connection on page 43.

Using a cellular phone to initiate a

connection

1 Use MULTI-CONTROL to select

Connection open in the function menu.

Refer to Function and operation on the previous

page.

2 Press MULTI-CONTROL to open the con-

nection.

Always waiting flashes and the unit is now

on standby for connection from a cellular

phone.

3 Use cellular phone to connect to this

unit.

# PIN code is set to 0000 as the default. You

can change this code. Refer to Entering PIN code

for Bluetooth wireless connection on page 43.

Disconnecting a cellular phone

1 Use MULTI-CONTROL to select

Disconnect phone in the function menu.

Refer to Function and operation on the previous

page.

Device name of the connected phone appears

in the display.

2 Press MULTI-CONTROL to disconnect a

cellular phone from this unit.

After disconnection is completed,

Disconnected is displayed.

Registering a connected

cellular phone

1 Use MULTI-CONTROL to select

Set phone in the function menu.

Refer to Function and operation on the previous

page.

Available accessories

Section

Available accessories

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEX-P99RS Seite 53

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEX-P99RS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info