Bedienungsanleitung Pioneer DEX-P99RS (Seite 54 von 75) (Englisch)

491816

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

2 Push MULTI-CONTROL up or down to

select a pairing assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# Push MULTI-CONTROL left or right to switch

the BD address and device name.

# As you select each assignment, you can see

whether or not a phone is already registered. If

the assignment is empty, No data is displayed. If

the assignment is already taken, the device name

appears. To replace an assignment with a new

phone, first delete the current assignment. For

more detailed instructions, see Deleting a regis-

tered phone on this page.

3 Press MULTI-CONTROL to register the

currently connected phone.

When registration is completed,

Reg.Completed is displayed.

# If the registration fails, Reg.ERROR is dis-

played. In this case, return to step 1 and try

again.

Deleting a registered phone

1 Use MULTI-CONTROL to select

Delete phone in the function menu.

Refer to Function and operation on page 52.

2 Push MULTI-CONTROL up or down to

select a pairing assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# Push MULTI-CONTROL left or right to switch

the BD address and device name.

# If the assignment is empty, No data is dis-

played and operation is not possible.

3 Push MULTI-CONTROL right to select

Delete YES.

Delete YES is displayed. Deleting phone is

now on standby.

4 Press MULTI-CONTROL to delete the

phone.

After the phone is deleted, Deleted is dis-

played.

Connecting to a registered

cellular phone

Connecting to a registered phone

manually

1 Use MULTI-CONTROL to select

Connect phone in the function menu.

Refer to Function and operation on page 52.

2 Push MULTI-CONTROL up or down to

select a pairing assignment.

P1 (user phone 1)—P2 (user phone 2)—P3

(user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# Push MULTI-CONTROL left or right to switch

the BD address and device name.

# If the assignment is empty, No data is dis-

played and operation is not possible.

3 Press MULTI-CONTROL to connect the

selected cellular phone.

While connecting, Connecting is displayed.

After the connection is completed, Connected

is displayed.

Connecting to a registered phone

automatically

1 Use MULTI-CONTROL to select

Auto connect in the function menu.

Refer to Function and operation on page 52.

2 Press MULTI-CONTROL to turn auto-

matic connection on.

If your cellular phone is ready for Bluetooth

wireless connection, connection to this unit is

automatically established.

# To turn automatic connection off, press

MULTI-CONTROL again.

Using the phone book

Transferring entries to the phone book

The Phone Book can hold a total of 500 en-

tries. 300 from User 1, 150 from User 2, and 50

from User 3.

1 Use MULTI-CONTROL to select

PH.B.Transfer in the function menu.

Refer to Function and operation on page 52.

Available accessories

Section

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DEX-P99RS Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Pioneer DEX-P99RS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info