491997

Pioneer DJM-350-W Seite 12

12
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
DRB1501-D
En
12
12
3 Turn [LEVEL] 4 in the MIC/
AUX section clockwise.
The sound of the microphone or external device is output from the
speakers.
Adjusting the sound quality
Turn [HI] or [LOW] 5 in the MIC/
AUX section.
Refer to Specifications on page 16 for the range of sound that can be
adjusted by each control.
Recording the performance (USB
recording section)
The same sound as the sound being output from the [MASTER OUT 1,
2] terminals can be recorded as a WAV file on a USB device.
! The name of the files created when the sound is recorded is in the
format [REC***.WAV] (*** is a 3-digit number).
PREVIEW
TRACK MARK SEARCH

PLAY
USB
STOP
REC

o
p
k
l
m n
1 Insert the USB device into the USB device insertion
slot k.
The [USB STOP] indicator l flashes.
After a while, the [USB STOP] indicator stops flashing, remaining lit,
and the recording standby mode is set.
2 Press [REC k/
g] m.
Recording starts.
The [REC k/
g] indicator m flashes.
! When [REC k/
g] is pressed again, the [REC k/
g] indicator turns
off and recording stops.
! Continuous recording is possible for 180 minutes. If recording con-
tinues for over 180 minutes, the recording data on the USB device
is automatically split.
! Recording is possible for about 90 minutes on a 1 GB USB device.
Playing recorded tracks
Press [PLAY f] n.
Playback starts.
The [PLAY f] indicator n lights.
! When [PLAY f] is pressed again, playback is paused.
! Only WAV files stored in the [PIONEER DJM / DJM350 REC] folder
on the USB device can be played.
Previewing recorded tracks
1 Turn [MIXING] 8 counterclockwise from the center
position.
2 Press and hold in [TRACK MARK (PREVIEW)] o.
The sound of the recorded track can be heard over the headphones
while the button is pressed.
! The sound being previewed is added to the sound of [CH-1] and
[CH-2] and output from the headphones.
! The sound being previewed is not output from the speakers.
! Previewing is not possible while the track is being recorded or
played.
Fast-forwarding/
reversing recorded
tracks
During playback, press and hold in [SEARCH o, p] p.
The track is fast-forwarded when [p] is pressed and held in.
The track is fast reversed when [o] is pressed and held in.
The [PLAY f] indicator flashes during fast-forwarding/
reversing.
! Fast-forwarding/
reversing is not possible when in the pause mode.
Cuing to the beginning of recorded tracks
Press [SEARCH o, p] p.
Press the [p] to move to the beginning of the next track.
Press [o] once to move to the beginning of the currently playing
track, twice to move to the beginning of the previous track.
Splitting tracks while recording
During recording, press [TRACK MARK (PREVIEW)] o.
The currently recording track is split and stored on the USB device.
! When split tracks are played on this unit, the sound may be inter-
rupted at the boundary between the two tracks.
Deleting recorded tracks
1 While playing the track, press [PLAY f] n.
The track you want to delete is paused.
2 Press [PLAY f] n for at least 2 seconds.
The [REC k/
g] indicator flashes.
3 While pressing [PLAY f] n, press [REC k/
g] m.
The [REC k/
g] indicator lights and the track is deleted.
! Track deleting is canceled if [PLAY f] is released while the [REC
k/
g] indicator is flashing.
Disconnecting USB devices
Always perform the following procedure to disconnect USB devices.
Pulling the USB device out without performing this procedure could
make the USB device unreadable.
When turning the set’s power off, be sure to remove the USB device
first.
1 Press [USB STOP] l for at least 1 second.
The [USB STOP] indicator flashes, then turns off.
2 Disconnect the USB device.
About the auto standby function
When the auto standby function is turned on, the power is automati-
cally set to the standby mode after the set time has passed with all of
the conditions below met.
— That none of this unit’s buttons or controls are operated.
— That this unit’s channel level indicator is not lit.
— That the USB device’s recording and playback functions are not in
use.
Setting the auto standby function
First set this unit to the standby mode.
… 12 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Pioneer DJM-350-W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info