Bedienungsanleitung Pioneer DVR-660H-K (Seite 42 von 145) (Englisch)

544415

Zoom out

Zoom in

Vorherige Seite

1/145

Nächste Seite

Recording

Note that the recording is always made to

the HDD. If you want to record to a DVD disc,

you’ll need to switch on the power and use

the full VCR Plus+ programme screen.

Important

•You can’t use this feature until you have

set up the guide channels. see VCR

Plus+ CH Setting on page 114.

• You can’t change the recording mode.

•You can’t program daily or weekly timer

recordings.

1 Press ‘VCR Plus+’.

The front panel display shows the current

recording mode and prompts you to enter

the PlusCode programming number.

2 Use the number buttons to enter the

PlusCode number.

•To clear the last digit entered, press

CLEAR.

3 Press ENTER.

The display shows the timer settings:

Date  Start time  End t

ime  HDD and

Recording channel  Recording mode

•If CODE ERROR appears in the display,

check that the number is correct and

that the guide channel is set (see VCR

Plus+ CH Setting on page 114), then set

the timer recording again.

•If CAN’T SET appears in the display, it

means that although you entered a valid

PlusCode number, the programme has

already finished.

Setting a manual timer recording

The timer recording scr een you can see all

the timer programmes already set, clear

programmes and set up new ones.

1 Press HOME MENU, select Timer

Recording, then Timer Recording.

This screen shows all the timer programmes

currently set.

•Each row is for one timer recording

programme, with the date and time

information, channel, recording mode,

DVD or HDD and recording status.

• The amount of free space available on

the HDD and the currently loaded

recordable DVD is shown towards the

bottom of the screen.

•In the upper-right corner, the number of

timer programm

es already set is shown

next to Tmr Pgms.

•If there are more than five timer

programmes already set, press

NEXT  to switch page (go back using

the PREV  button).

• You can also delete a timer programme

before it’s started (before the recorder

enters timer recording standby) by

highlighting it and pressing CLEAR. See

also Deleting a timer programme on

page 44.

2 Select ‘New Input’ to set a new timer

programme, then press ENTER.

HDD Remain

DVD Remain

59h59m(SP)

1h59m(SP)

3/26 SUN 3:00PM

Tmr Pgms 3/32

Manhattan Open Tennis OK

3/26 SUN 6:00PM – 7:00PM 10ch

World Journey

3/27 MON 7:30PM – 9:00PM 4ch

8ch

Flower

Until 4/20

MON – FRI 1:30PM – 2:00PM

New Input

Timer Programme View

Timer Programme Set

Manhattan Open Tennis

CH Date Start Stop Extend

10ch EVERYDAY 6:00PM 7:00PM 30 min

Enter Details

Detailed Settings

Record To HDD

Recording Mode XP

Auto Replace Rec. On

Genre No Category

Dual Mono Recording L

HDD Recording Format Video Mode On

Store Programme

Cancel

Set Title Name

Set Detailed

DVR660HK_KC_EN.book 42 ページ２００８年２月７日　木曜日　午後２時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Pioneer DVR-660H-K Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info